Whats Is This Panel(s) Called?
Started by
blackbelt1990
, Aug 01 2008 01:46 PM
15 replies to this topic
#1
Posted 01 August 2008 - 01:46 PM
Hellow all,
Just been poking away at the car.... i need the panel that should be where this hole is, it's around the air vent. I thought it was the "filtch?" panel but that doesn't seem to work on the mini spares site.
any ideas?
Thanks!!!
Just been poking away at the car.... i need the panel that should be where this hole is, it's around the air vent. I thought it was the "filtch?" panel but that doesn't seem to work on the mini spares site.
any ideas?
Thanks!!!
#2
Posted 01 August 2008 - 02:11 PM
looking at the extent of the rust you might want to get this and cut a bit out.
Inner Wing
but it is pricey so you might want to visit a scrappy or consider fabricating it yourself out of a sheet of metal (much cheaper but a bit of ball ache )
Inner Wing
but it is pricey so you might want to visit a scrappy or consider fabricating it yourself out of a sheet of metal (much cheaper but a bit of ball ache )
Edited by Wilson1275, 01 August 2008 - 02:13 PM.
#3
Posted 01 August 2008 - 02:13 PM
is it the bulkhead or footwell NOT TO SURE!!
#5
Posted 01 August 2008 - 02:21 PM
Not to sure, but think this is what you are looking for Flitch Panel - Ebay Link
#6
Posted 01 August 2008 - 02:23 PM
thats a good price kinjo - good find but he needs a bit more inside the wing.
(should you not be on your way to SMD??)
(should you not be on your way to SMD??)
#7
Posted 01 August 2008 - 02:25 PM
So not to Hijack the thread, I am going - but not right now
Got to work tomorrow morning, last minute thing.
Got to work tomorrow morning, last minute thing.
#8
Posted 01 August 2008 - 02:25 PM
Yea it is a good price, but going off the picture more of the inner wing will need to be included, so you will probably be looking for a full replacement inner wing...
#9
Posted 01 August 2008 - 02:50 PM
Hmm... thanks guys
Think I'm on the lookout for a washing machine now then, £100 is a bit steep because the rest of the wing is fine
Ryan
Unless anyone has a donor lying around and can supply me some 'lectricity.... pleeeeease
Think I'm on the lookout for a washing machine now then, £100 is a bit steep because the rest of the wing is fine
Ryan
Unless anyone has a donor lying around and can supply me some 'lectricity.... pleeeeease
#10
Posted 01 August 2008 - 07:46 PM
Is this the panel your after?? Dont think its heritage though.
http://www.minispare....aspx?pid=36369
Paul.
http://www.minispare....aspx?pid=36369
Paul.
#11
Posted 01 August 2008 - 08:21 PM
Yeah, by the looks of it, thats the best I'm going to get, looks like its fabrication time, lol
Ryan
Ryan
#12
Posted 01 August 2008 - 09:23 PM
I had the same thing with the rust past the vent hole I went for the full inner wing but it was a mare to fit so ended up cutting it in half and putting it in in two pieces, on the other side i just used the half wing and then made the rest myself, I wen for hertitage for the full wing about 90quid I think and mini machine for the other stuff, they make good panels at a good price, they got full online catalogue, stay well clear of hadrian or magnum panels they are more hassle then they are worth.
#13
Posted 01 August 2008 - 09:35 PM
Is this the panel your after?? Dont think its heritage though.
http://www.minispare....aspx?pid=36369
Paul.
thats def the right panel u need
i bought 2 other week
looking at ur pic tho u need the scuttle repair too
if u do a search for "my daughters mayfair" u will see the repairs iv done so far (same reapairs u need to do)
#14
Posted 02 August 2008 - 10:03 AM
M Machine in darlington do a repair panel for tis at about £12.... I bought both sides.... easy to fit
Rob
Rob
#15
Posted 10 August 2008 - 11:35 AM
Whats the light above your ignition for?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users