Problems, Questions and Technical
This section can be used to get help with any technical problems which you are experiencing with your Mini. You can also help others with their Mini related technical issues.
Warning
Please be careful when answering peoples technical questions that you do not misguide them into taking inappropriate action. Not only is this annoying, but it can also be costly and could even be dangerous if the wrong information is given. This is why we ask that only first-hand and factual information is posted in reply to peoples queries. If you are not 100% certain of your reply, be sure to point out your uncertainty.
Getting a Good Response
In order to get the best advice as quickly as possible for your technical issue you should include the following information in your topic:
1. Year of your vehicle (e.g. 1988)
2. Model of your vehicle (e.g. Mini Designer)
3. A detailed description of the problem and anything you have tried to fix the problem.
4. Pictures can sometimes help in diagnosing a problem, if you think they could, why not include some?
The more information you can give, the more likely that someone can give you the correct answer to your issue and the quicker your problem can be resolved.
Subforums
|
|
Injection Mini Specific - SPi/MPiAny technical question, issues and problems relating to any part of fuel injected (SPi or MPi) Minis. |
|
|
![]() |
Clutch Oil Seal ReplacementStarted by minidave54 , 18 Jun 2016 |
|
|
|
Anything Good From The Brits, 9800Rpm 150Bhp Minis !Started by ryomini , 17 Jun 2016 |
|
|
||
Compression Test Result InterpretationStarted by imaparana , 14 Jun 2016 |
|
|
||
Gearbox "band Saw" NoiseStarted by allaggro , 23 May 2011 |
|
|
||
Door Hinge Problem. Need Advice What To BuyStarted by grumpy2 , 17 Jun 2016 |
|
|
||
Stainless Lcb Heat ReductionStarted by Northernpower , 16 Jun 2016 |
|
|
||
M35J Replacement BushesStarted by mad4classics , 17 Jun 2016 |
|
|
||
Radius Arm Pin Change OnlyStarted by gazza01 , 17 Jun 2016 |
|
|
||
Vetro Clutch Torque SettingsStarted by cristiano1968 , 17 Jun 2016 |
|
|
||
Centre Speedo ConversionStarted by andyt , 15 Jun 2016 |
|
|
||
Wrapping Manifold - Yes Or NoStarted by Kt1966 , 15 Jun 2016 |
|
|
||
Stiff Gear LinkageStarted by inim_repooc , 16 Jun 2016 |
|
|
||
Block To Oil Filter Pipe 11/16 Unf Pressure Fit - Fix It PleaseStarted by ryomini , 16 Jun 2016 |
|
|
||
Stainless Clutch Slave Push Rod?Started by alex-95 , 12 Jun 2016 |
|
|
||
Threaded Hole In Inlet?Started by Minimoke8394 , 08 Apr 2014 |
|
|
||
Hif44 Service KitStarted by racingbob , 16 Jun 2016 |
|
|
||
Engine And Gearbox Rebuild, Differential Seems Too StiffStarted by mitch3 , 12 Jun 2016 |
|
|
||
engine
O S Built - What Have I Got?Started by j_d , 16 Jun 2016 |
|
|
||
Rocker Arm ClearanceStarted by Pairaminis , 12 Jun 2016 |
|
|
||
Rear Subframe Bush DirectionStarted by thetrev.com , 13 Jun 2016 |
|
|




