What sort of power do you think i could get from my current spec'd engine?
1340 Metro Turbo
Gasflowed, P & P head, shaped chambers
STD NGK Turbo Plugs
1.5 rollertip-rockers
Belt driven turbo cam
Intercooler (600mmx300mmx75mm)
Green Cotton air filter
maniflow 2" system to a Titanium GSX-RR exhaust
2-stage boost from 4psi to 8psi at 3000rpm
JK straightcut drops (1.04 ratio)
i would be happy with 130bhp, any more would be a bonus, this possible?
Engine Spec: Optimistic??
Started by
mighty_mini
, Apr 26 2005 07:42 PM
5 replies to this topic
#1
Posted 26 April 2005 - 07:42 PM
#2
Posted 27 April 2005 - 09:04 AM
is it a 1330?+60 thou or is the crnak stroked?
#3
Posted 27 April 2005 - 09:11 AM
8psi with a cam and slight head mods. I'd guess at 120bhp
#4
Posted 27 April 2005 - 09:12 AM
also what cam are you using?power will also depend on voalve sizes and the work done on the head
#5
Posted 28 April 2005 - 07:25 AM
120-130hp depending on cam choice. Is it just the standard "Turbo" cam ?
Phil.
Phil.
#6
Posted 28 April 2005 - 09:10 AM
mine was 112bhp with a similar spec to yours so i'd say round about the same...all depends on which rollers you use though
mine was 99bhp@wheels last time it was on the rollers at spams. going again tomorrow though so maybe in for a little more, fingers crossed.
mine was 99bhp@wheels last time it was on the rollers at spams. going again tomorrow though so maybe in for a little more, fingers crossed.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users