Jump to content


Photo

What Spec Is Your Engine?


  • Please log in to reply
197 replies to this topic

#1 Bluemini

Bluemini

    Mini Doctor

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 4,436 posts
  • Location: Canada
  • Local Club: Blacktop Bombers

Posted 22 May 2005 - 08:21 PM

Ok, we have decided to do an FAQ style topic on engines and various stages of tune for each, but what we want is for you guys to tell us the size of your engine and state of tune/mods that have been done to it.

Please keep it on topic and no stupid posts on this one as it will be for everyone once we go through them all and get all the info we need.

So what we're going to want from you is - Engine size and any modifications that have been done to it. We will then PM the people we need more information from.

Thanks, TMF Doc's

#2 minimadjonesy

minimadjonesy

    Crazy About Mini's

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 6,417 posts
  • Local Club: SMAC

Posted 22 May 2005 - 08:25 PM

ok, did have a 1293 stage 3 engine witha stage 3 head, kent 286 cam and uprated gearbox. only had standard diff though
got about 90bhp from it without it being RR'd!

#3 Jackman

Jackman

    Up Into Fourth

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 4,053 posts

Posted 22 May 2005 - 08:29 PM

Standard 998, no mods except for having electronic ignition fitted today. Not running proper yet, needs tuning still.

#4 Bungle

Bungle

    Original Spamster

  • Members
  • PipPipPipPipPipPipPipPipPipPipPip
  • 28,971 posts
  • Location: Cornwall
  • Local Club: cornish mini club

Posted 22 May 2005 - 08:35 PM

my 1990 cooper

1275 cc , minisport stage 4 head ,single box RC 40 s/s exhaust , maniflo LCB mainfold , K&N filter , 1.5 roler tip rockers , jack knight 5 speed box twin pin diff

sarahs 1965 mini

998 cc , big valve head , LCB , single box exhaust , twin 1 1/4 carbs + K&N filters

we are both due for a rolling road tune so will put HP at some other date

#5 Bluemini

Bluemini

    Mini Doctor

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 4,436 posts
  • Location: Canada
  • Local Club: Blacktop Bombers

Posted 22 May 2005 - 08:37 PM

1380, stage 3 head, 296 Kent cam, 1.5 roller tips, adjustable vernier, MG Metro inlet, 1 3/4" HIF44, K&N cone filter, LCB, lightened flywheel, Orange diaphram, Rally clutch plate, Aldon Yellow dizzy with vacume removed, s/c drops, 3.9:1 f/d, 10" wheels

#6 chelseahelen

chelseahelen

    TMF GIRLY RACER!!!!!

  • Members
  • PipPipPipPipPip
  • 398 posts

Posted 22 May 2005 - 08:38 PM

Standard 998 cc - no mods yet!

#7 Guess-Works.com

Guess-Works.com

    Gearbox Guru

  • Traders
  • PipPipPipPipPipPipPipPipPipPipPip
  • 19,838 posts
  • Local Club: Rugby Classic Mini Owners Club

Posted 22 May 2005 - 08:46 PM

Here's the spec on my 1330..

- 1300GT solid wall A series block bored to +.060
- 21251 slipper pistons (8.8:1 CR std, block decked to give 10:1 CR)
- 1300GT 11 stud head, 1.4" inlet 1.1" exhaust bronze guides std rockers, cleaned up ports and combustion chamber ( probaby equiv to stage 2 )
- Tuftrided crank
- Std flywheel / clutch
- 276 time @ 104 degrees, fully adjustable vernier silent chain timing gear.
- A series helical drops.
- A series gearbox with 3.44 CWP on a X pin Diff.
- HIF44 with modified BBC needle 8 oz spring and K&N
- Std Maniflow LCB hooked to 1.7/8" twinbox maniflow system

ooh.. forgot about ignition..

- lucas sports coil
- BP7ES plugs
- Aldon 100AY dizzy, std points.

Never got the above on a rolling road, but did the 1/4 mile in 16.9 secs, in a mini std weight mini..

**edit** now old spec, new spec to be added shortly...

Edited by GuessWorks, 11 July 2005 - 12:59 PM.


#8 Jammy

Jammy

    Moved Into The Garage

  • Members
  • PipPipPipPipPipPipPipPipPipPipPip
  • 25,397 posts

Posted 22 May 2005 - 08:46 PM

1425CC
Forged 73.5 Omega pistons (giving 11.5:1 C/R)
Cosworth 's' conrods
Lightened flywheel
Ap Racing clutch with orange diaphragm
Jack Knight SC 4 speed gearbox
Cross pin diff
'Race' cylinder head with isky double springs
1:1.5 forged roller rockers
Bill Richards custom profile camshaft
Cosworth constant ignition pack
45 DCOE webber carb

#9 TimS

TimS

    Mini Doctor

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 2,712 posts
  • Local Club: TMF

Posted 22 May 2005 - 08:59 PM

1275cc bespoke stg 3 head, std valves, electronic ignition, 1.5/1 roller tips, std cam 74bhp


Morspeed 1330,
no oil pressure,
MSPD phase 2 cam,
bespoke 3/4 with 35.7mm/ 29mm valves,
Bronzed valve guides
Double valve springs
1.5-1 roller tip rockers,
lighweight flywheel,
turbo clutch plate,
hepolite 21253 pistons
10.5-1 CR electronic ignition,
duplex timing gear,
hardened diff pin

Edited by Flappyplasticbits, 22 May 2005 - 09:02 PM.


#10 Madmax

Madmax

    Up Into Fourth

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 2,638 posts
  • Local Club: Grimsby & Louth MOC

Posted 22 May 2005 - 10:39 PM

1275
swiftune sw5 cam
roller tip 1.5:1 rockers
lightweight flywheel (verto)
lightweight vernier duplex timing gear
morspeed trackday head 35.7mm/29mm valves
swiftune double valve springs
high capacity oil pump
pipercross filter
2 core rad
standard diff/clutch/bottom end

Edited by Madmax, 22 May 2005 - 10:41 PM.


#11 Purple Tom

Purple Tom

    Up Into Fourth

  • TMF+ Member
  • PipPipPipPipPipPipPipPipPip
  • 4,921 posts
  • Location: Derbyshire
  • Local Club: TMF

Posted 22 May 2005 - 10:49 PM

1275 Cooper - standard MG Metro A+ engine.

1293 Clubman -
- 1293 A+ block
- Morspeed trackday head
- Morspeed trackday camshaft
- Tuftrided, wedged and balanced crank
- Lightened rods
- Omega pistons
- Steel non verto flywheel, with orange plate and diaphragm
- S/C drop gears
- 4sp S/C gearbox
- Cross pin differential, 3.44:1 CWP
- High capacity water pump
- 1.5:1 roller rockers

other things that I can't remember but will update.

#12 Mini Steve

Mini Steve

    Super Mini Mad

  • Members
  • PipPipPipPipPipPip
  • 512 posts

Posted 23 May 2005 - 12:19 PM

as far as i no!!

1340cc
omega pistons
45 webber
close ratio gearbox
lightend flywheel

to be honest thats all i no bout her :lol: !!

new engine soon which ill be able to tell all about :grin: !!

#13 millsminis

millsminis

    TMF Moderator

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 2,882 posts
  • Local Club: Cornish Mini Club

Posted 23 May 2005 - 12:46 PM

998 cc engine
Stage 1 tuning kit (but no change of air filter!)
Lumenition electronic ignition

#14 Dom

Dom

    Moved Into The Mazda

  • TMF+ Member
  • PipPipPipPipPipPipPipPipPipPipPip
  • 10,685 posts
  • Location: Nürburgring

Posted 23 May 2005 - 01:26 PM

Standard 1275 Cooper Carb with RC40 single box exhaust.

#15 clubman_dan

clubman_dan

    Mini Mad

  • Members
  • PipPipPipPip
  • 237 posts

Posted 23 May 2005 - 01:56 PM

standard 1275 spi with rc40 single box cat back exhaust




2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users