Special Offer On Polycarbonate Windows For Minis

Just another quicker question, (i will be ordering once your back up and running)

are the pop out vents in a fixed position after you have fitted them, or would i be able to twist them, so i could have them either with the opening pointing forward, or the opening towards the back?


Thanks

Chris

Hi Chris. They are 360 degree rotational once fitted. Cheers, Dan

Cheers dude, ill be in touch after SMD.

We are now back from holiday and back in full operation

Dan

im placing my order friday as per the e-mail

Hi,

I would like to order the rear 3 windows, all with bronze tint, with fixed quarters, and 2 pop out vents in each rear quarter positions as pictured below.




I make that a total of £175.16 including P&P.

I tried to place the order through the website, but it wouldn't work for me. so what is the best way to make payment?


Thanks

Chris

Can the "round square hole" in the front side windows (Mk3) be made slightly bigger? If so is there any increase in cost. It's for a rally car so I'd like it a reasonable size to pass documents through. (Note that I'm aware that the good old MSA don't allow sliders in rally cars as they don't think that it's period )

I believe the sliders are large enough to pass an A4 piece of paper through corner to corner (but will check with my Dad asap), we have recently made the square holes more square and less of a rounded square.

Dan

Edited by mini-man-dan, 18 August 2010 - 04:20 PM.

Can the "round square hole" in the front side windows (Mk3) be made slightly bigger? If so is there any increase in cost. It's for a rally car so I'd like it a reasonable size to pass documents through. (Note that I'm aware that the good old MSA don't allow sliders in rally cars as they don't think that it's period )

im guessing that must be historic rallying? as i know alot of people who rally including my own car which has passed msa rulings, passed log bookings, scruteneering etc without a hitch

Recieved my windows today , well packaged and a quality product , highly recommended.

The Mk1 door kit, does it fit in place of the original glass and accept the original catches etc?

Cheers

The Mk1 door kit, does it fit in place of the original glass and accept the original catches etc?

Cheers

what he sad lol

We don't do a Mk3 to Mk1 door kit, we can only supply the windows. The windows come pre-drilled for standard latches, but if you would rather them not to have the holes then that is not a problem.

Dan

EDIT: Sorry, didn't quite understand the question. Yes, the Mk1 door windows are a straight swap for the glass.

Cheers

Edited by mini-man-dan, 19 August 2010 - 08:06 PM.

im guessing that must be historic rallying? as i know alot of people who rally including my own car which has passed msa rulings, passed log bookings, scruteneering etc without a hitch

Historic rally car technical information:
Window Sliders
The following items have not been proven to have been used in period.

Slider Kits

The fitting of slider kits in the front door windows is not Permitted.

See: http://www.hrct.co.u...window-sliders/

Look forward to receiving the full info on the Mini front window slider "kits"

A full kit consists of 2 front door windows both with sliders (Mk3+) , 2 rear quarters of your choice and 1 rear window in 4mm clear polycarbonate -
RRP £159.99
With Discount £135.99
www.acwmotorsportplastics.co.uk

Could the rear window be made slightly bigger so it can be riveted in to place (like the sides) rather than having to go into the rubber?

Cheers