Monster sound system in a mini
Started by
cooper_shaz
, Oct 18 2005 08:42 AM
60 replies to this topic
#31
Posted 29 November 2005 - 12:13 PM
and
#32
Posted 29 November 2005 - 12:14 PM
painted
Attached Files
#33
Posted 29 November 2005 - 12:15 PM
amps
Attached Files
#34
Posted 29 November 2005 - 12:18 PM
A different centre system.
Frame made and covered in fleece, ready for application of resin/bodyfiller mix
Frame made and covered in fleece, ready for application of resin/bodyfiller mix
Attached Files
#35
Posted 29 November 2005 - 12:19 PM
Resin set and holes for speakers cut out, ready to re-inforce the inside
Attached Files
#36
Posted 29 November 2005 - 12:21 PM
Fill, sand, fill, sand, fill, sand, i think you get it, build up the shape and
get it smoooooooooth
get it smoooooooooth
Attached Files
#37
Posted 29 November 2005 - 12:22 PM
Ok now that was easy...!!
nice and smoooooth, ready to sit in place of the back seat in the mini...!!
test fit... weighs a TON...!!
and then into paint we go...!!
nice and smoooooth, ready to sit in place of the back seat in the mini...!!
test fit... weighs a TON...!!
and then into paint we go...!!
Attached Files
#38
Posted 29 November 2005 - 12:24 PM
Painted up and ready to secure in place..
but first lets fit up everything in and get all the screw holes etc spot on...
not much room in the car after this is in..
alll isnt it lovely...
I'm going to call it... the sound propelled mini...!
but first lets fit up everything in and get all the screw holes etc spot on...
not much room in the car after this is in..
alll isnt it lovely...
I'm going to call it... the sound propelled mini...!
Attached Files
#39
Posted 29 November 2005 - 12:26 PM
There ya goes.....!!
All together say ahhhhhhhhhh :grin:
All together say ahhhhhhhhhh :grin:
Attached Files
#40
Posted 29 November 2005 - 01:17 PM
wow looks great! is that in your mini?
#41
Posted 29 November 2005 - 09:58 PM
It was meant to be an install for the clubby estate, but along the planning route it got re-designed to fit a honda civic..
I have actually not done the install for my car yet as every time i start the project gets hi-jacked by someone and I end up selling the install and adapting it for their car...!!
The mini's time will come....!!! Probably..! hopefully..!
I have actually not done the install for my car yet as every time i start the project gets hi-jacked by someone and I end up selling the install and adapting it for their car...!!
The mini's time will come....!!! Probably..! hopefully..!
#42
Posted 07 June 2006 - 12:46 AM
Holy C**p! I must print all this off and get started! Thanks for all the info! Very helpful! *Goes to print but dosnt have any ink* Noooo
#43
Posted 09 August 2006 - 06:34 PM
thats really good stuff, thanks a million cooper shaz I will give it a whirl.
cheers Simon
cheers Simon
#44
Posted 17 October 2006 - 02:36 PM
Yes once i get my mini i am goin to give it a go
What sort of filler did you use? any recomendations?
also i have used spray glue before and some spray glue is terrible, any recomendations for good spray glue?
1 more question when you said for big creases you fibre glass, is that the fibreglass sheets you can buy from halfords also, and i also found the resin but not any hardener?
cheers
Martin.
What sort of filler did you use? any recomendations?
also i have used spray glue before and some spray glue is terrible, any recomendations for good spray glue?
1 more question when you said for big creases you fibre glass, is that the fibreglass sheets you can buy from halfords also, and i also found the resin but not any hardener?
cheers
Martin.
Edited by Martin123, 17 October 2006 - 04:45 PM.
#45
Posted 23 November 2006 - 08:07 PM
is it ok to mould the whole unit into the car, I am doing a set up in the rear pockets next to the arches, which will cover most of the side.......but im going to fix it into the car as i go, is this ok? and i will be covering it with carpet so it doesn't need to be too smooth
Ian
Ian
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users