Roll Over Jig
#1
Posted 19 October 2010 - 02:32 PM
ive looked but can find any
thanks danny
#3
Posted 19 October 2010 - 02:36 PM
#4
Posted 19 October 2010 - 02:40 PM
they also do the plans to suit, not to bad for what you get but their in the states so might be some duty....
#5
Posted 19 October 2010 - 06:12 PM
#6
Posted 19 October 2010 - 06:24 PM
You'll need square tubing and a scaffold pole, make life so much easier working on the underside
Matt
#7
Posted 19 October 2010 - 06:26 PM
thanks you soooo muchIt's dark out now but will measure up my spit tomorrow and post dimensions for you
You'll need square tubing and a scaffold pole, make life so much easier working on the underside
Matt
dan
#8
Posted 20 October 2010 - 05:59 AM
Dan, I'll measure mine if minim@t doesn't come up with the goods, though it's a saloon so the length will be too short for you. Either way, I'd recommend linking the two stands together and putting the whole thing on castors, it makes life sooooo easy.hmm i want to make one would be fun as anyone got plans ??
I used a a scaffold pole, two triangular constructions scrounged from work and a couple of roof joists to link the uprights together. A universal scaffold clamp split in half locks the thing at any angle.
P1120228_b.JPG 187.74K 202 downloads P1120222_b.JPG 120.34K 145 downloads
#9
Posted 20 October 2010 - 06:47 AM
Excuse the crude paint image, very basic in design but works a treat, ive 2 half poles with a joint in the middle, makes it easier to store but for your clubby should be long enough to fit,
hope this helps,
spitroastjig.jpg 189.42K 180 downloads
matt
#10
Posted 20 October 2010 - 07:00 AM
#11
Posted 20 October 2010 - 07:24 AM
here ya go
http://cgi.ebay.co.u...=item230ae6cef3
I got one of them for me van.... don't forget that the mounting points for an estate are different to the saloon...
#12
Posted 20 October 2010 - 08:15 AM
try this 1, its the only one that i can see with photo's and drawings
hope the helps
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users