Posted 11 January 2006 - 12:23 AM
No because the single system has a compensator on the rear subframe which adjusts the pressure to the rear brake...
The above is good advice, If you want a servo use the one which is designed for a split system, they are not uncommon and can bee seen on ebay fairly frequently, and I'm sure if you put a wanted post up, you'd probably get one fairly quickly.
If you look at your brake master you will see two pipes comming out of it not one, If you remove one of those you loose half your brakes.
The second link you showed is a clutch master, which is a different fitting and shape to a brake master...
Serious advice... Don't mess with your brake system unless you are completely sure of what you are doing, not only does your life depend on it but the lives of other road users and pedestrians.