Mobile Welding And Repairs. Rust And Repairs!
Started by
Andyagl
, Jul 18 2011 07:54 AM
78 replies to this topic
#1
Posted 18 July 2011 - 07:54 AM
Hi.
Mobile welding and repairs business for classic cars. Minis inparticular but other classics too.
Come to your house to work on your car.
Much of my work is people restoring their cars in their garage and they need some welding doing. Its easier than trying to get the car to a garage. Plus they charge through the roof.
Im not afraid to take on bigger jobs. Recently went to a job in Blackburn (173 miles from me) for a '63' MGB. was there for 6 days replacing both sills (4 parts each), the floor, rear quarters, etc. A total restoration. The guy brought it not realising it was so bad. I think most of us have been there!!
I have restored a few minis too. Putting in a Rover K series in my mini at the moment. Toying with the idea though of taking that out and dropping in a four wheel drive honda vtec or front engine/rear wheel drive bike engine.
Very reasonable prices and quality work for your pride and joy.
Email / call me on [email protected] / 07877950553.
www.rustandrepairs.co.uk
Mobile welding and repairs business for classic cars. Minis inparticular but other classics too.
Come to your house to work on your car.
Much of my work is people restoring their cars in their garage and they need some welding doing. Its easier than trying to get the car to a garage. Plus they charge through the roof.
Im not afraid to take on bigger jobs. Recently went to a job in Blackburn (173 miles from me) for a '63' MGB. was there for 6 days replacing both sills (4 parts each), the floor, rear quarters, etc. A total restoration. The guy brought it not realising it was so bad. I think most of us have been there!!
I have restored a few minis too. Putting in a Rover K series in my mini at the moment. Toying with the idea though of taking that out and dropping in a four wheel drive honda vtec or front engine/rear wheel drive bike engine.
Very reasonable prices and quality work for your pride and joy.
Email / call me on [email protected] / 07877950553.
www.rustandrepairs.co.uk
#2
Posted 18 July 2011 - 08:32 AM
This is just what the market place needs.
Keep your prices fair and the care/quality good and you should be onto a winner.
Good luck
Keep your prices fair and the care/quality good and you should be onto a winner.
Good luck
#3
Posted 18 July 2011 - 08:40 AM
And local too...
That number has been saved...
That number has been saved...
#4
Posted 18 July 2011 - 11:46 AM
Whats your prices?
#5
Posted 18 July 2011 - 05:27 PM
Reasonably local to me too. Number saved.
#6
Posted 19 July 2011 - 08:28 AM
Whats your prices?
I work on the basis of 200 per day, or 25 per hour.
To give an idea of certain panels. An Outer sill will normally take around three hours including a couple of inner sill/step repairs. A full front end (A panels, wings, front panel, scuttle) about 4-5 hours. All depends on your cars amount of rust.
#7
Posted 19 July 2011 - 08:19 PM
how longs a piece of string? surely the chap would need to know what jobs he would be doing before giving prices outWhats your prices?
Nope, its normally a hourly based rate or labour charges etc.
Whats your prices?
I work on the basis of 200 per day, or 25 per hour.
To give an idea of certain panels. An Outer sill will normally take around three hours including a couple of inner sill/step repairs. A full front end (A panels, wings, front panel, scuttle) about 4-5 hours. All depends on your cars amount of rust.
Thats sounds very reasonable, very reasonable indeed
I shall pm you
#8
Posted 22 July 2011 - 10:30 AM
I look forward to hearing from you. Here is a picture of one of my Minis at London to Brighton this year. Ran out of time to get it painted so MOT'd it the day before and went like that.
Edited by Andyagl, 22 July 2011 - 10:32 AM.
#9
Posted 01 August 2011 - 07:34 AM
Thought ill add a couple more pictures of panels ive replaced.
Had to make up the roof corner for my cooper as you cant buy a repair panel.
Had to make up the roof corner for my cooper as you cant buy a repair panel.
Edited by Andyagl, 01 August 2011 - 07:40 AM.
#10
Posted 01 August 2011 - 03:56 PM
if only you came from the south east i need my rear boot welding as well as abit in the rear bin...
#11
Posted 02 August 2011 - 12:27 PM
your work seems pretty good, im saving your number.
#12
Posted 05 August 2011 - 12:35 PM
Just thought some people might like to see my personal project. Im roof chopping a mini. And there is also a picture of the cooper shown above after the paint i put on.
#13
Posted 12 August 2011 - 01:42 PM
More Pictures of my roof chop.
#14
Posted 15 August 2011 - 07:37 AM
Hoping the mini to look something like this in the future. although this has had a 3 inch roof and a 2 inch body chop. Wondering on the body chop now.
#15
Posted 14 September 2011 - 06:10 PM
update picture of my roof chop. and wheel arch tubbing. On 10'' wheels too, gonna bottom out on a twig!!
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users