Garage And Shed Full Of Spares!
Started by
R1minimagic
, Jul 28 2011 07:14 PM
81 replies to this topic
#31
Posted 27 August 2011 - 05:31 PM
Eugh I'd have rather had a carb engine :/ I wouldn't have needed many ancillaries, just the ones i wouldn;t be able to transfer from my 998. What would you be after out of interest?
#32
Posted 27 August 2011 - 05:35 PM
SPi engine can be run with carb, you just need to attach fuel pump, put normal dizzy in and swap injector for carb!
#33
Posted 27 August 2011 - 05:39 PM
I'm guessing I could just use the carb (hs2), dizzy and pump from my 998? What rough price are you after then with as little ancilleries as can be?
#34
Posted 27 August 2011 - 05:43 PM
I PM'd you
#35
Posted 28 August 2011 - 02:51 PM
do you have any good condition bonnets?
full door locks/mechanisms that would fit a 1986 mayfair?
full door locks/mechanisms that would fit a 1986 mayfair?
#36
Posted 28 August 2011 - 03:14 PM
Yes i have all those bits, I PM'd you
#37
Posted 28 August 2011 - 04:18 PM
can you send me some pics of the shells? particulary where the rust is? and what needs replacing. Thanks
#38
Posted 29 August 2011 - 04:48 AM
hi, have you any rear seatbelts, preferably black? thanks
#40
Posted 11 September 2011 - 08:18 PM
Wouldn't happen to have any bullet mirrors? Thanks
#41
Posted 12 September 2011 - 10:04 AM
clutch slave cylinder?
#42
Posted 12 September 2011 - 11:44 AM
Sorry no bullet mirrors but i have clutch slave cylinders, PM me!
#43
Posted 12 September 2011 - 02:26 PM
Do you have any solid front subby mounts? Im after a set of floor mounts and a set of tower mounts, cheers.
#44
Posted 12 September 2011 - 03:08 PM
sorry only standard ones
#45
Posted 12 September 2011 - 05:18 PM
Hello do you have any wiper blades, or maybe just 1? Also need a battery
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users