Jump to content


Photo

8 Port 998Cc Cnc Machined Billet Head And Collectors


  • Please log in to reply
85 replies to this topic

#46 brum,brum,mike

brum,brum,mike

    Super Mini Mad

  • Just Joined
  • PipPipPipPipPipPip
  • 554 posts
  • Location: Gloucestershire

Posted 03 January 2013 - 09:07 PM

Looking very good...

So what throttle bodies/carb's can be used?

Sorry if it says somewhere, i did look and couldn't find it ;D

#47 Elmtech

Elmtech

    Passed Test

  • Traders
  • PipPip
  • 30 posts

Posted 04 January 2013 - 12:31 PM

Well we designed the intake manifold for a ford mondeo tb as that's just something we easily found on ebay :D
There probably is some tb out there that is better suited.

Here are some rendered pictures of what the intake manifold is going to look like(just not as shiny). It features equal length runners which took a while to achieve.... Anyway, because of the size we have to print it in 3 different parts, the first part is done and can be seen in some other pic(s), but the center part is a bit nastier so it's not quite done yet.

Posted Image
Posted Image

#48 Elmtech

Elmtech

    Passed Test

  • Traders
  • PipPip
  • 30 posts

Posted 17 January 2013 - 08:51 PM

Almost done now! We're going to try to start the engine tomorrow. The 3D-printer isn't cooperating so we're welding a simple intake manifold together to test with.
Because the valves are moved compared to the stock head we had to swap/move all of the rockers, after that they lined up almost perfectly. No major issues in other words.

Posted Image

#49 Gr4h4m

Gr4h4m

    Camshaft & Stage Two Head

  • Members
  • PipPipPipPipPipPipPipPip
  • 1,802 posts
  • Location: Chester
  • Local Club: Club less.....

Posted 17 January 2013 - 09:57 PM

Nice where does the stat go?

#50 Elmtech

Elmtech

    Passed Test

  • Traders
  • PipPip
  • 30 posts

Posted 17 January 2013 - 10:29 PM

It doesn't have a thermostat atm. If/when we test it more on the road and we need one we'll just install an inline thermostat.

#51 Elmtech

Elmtech

    Passed Test

  • Traders
  • PipPip
  • 30 posts

Posted 23 January 2013 - 09:31 AM

It runs :shades:


Now we just need to find some 10" winter tires so we can test it on the road. Mapping it is proving a bit tricky thanks to the 310sp camshaft, but once everything is sorted we'll take it to the dyno.

Some more pics http://elmtech.eu/en...i-cylinder-head

#52 Elmtech

Elmtech

    Passed Test

  • Traders
  • PipPip
  • 30 posts

Posted 29 January 2013 - 08:16 PM

Some more videos =] We had the exhaust off for a while since we were having some problems getting it to start, it's sorted now though. It's pretty loud with open headers...
We also installed an alternator on it.


Edited by Elmtech, 29 January 2013 - 08:18 PM.


#53 danny1

danny1

    In the navy you can sail 7 peas

  • Members
  • PipPipPipPipPipPipPip
  • 1,321 posts
  • Local Club: bumpstart

Posted 30 January 2013 - 07:30 PM

looks good

you know what the final price would be on a full kit?

#54 steven

steven

    One Carb Or Two?

  • Banned from Buying/Selling
  • PipPipPipPipPipPipPip
  • 1,195 posts
  • Location: Uk

Posted 30 January 2013 - 07:37 PM

sweet :mrcool:

#55 giacomo

giacomo

    Super Mini Mad

  • Members
  • PipPipPipPipPipPip
  • 684 posts
  • Location: Southend/west cliff

Posted 31 January 2013 - 01:24 PM

I want :D

#56 Elmtech

Elmtech

    Passed Test

  • Traders
  • PipPip
  • 30 posts

Posted 01 February 2013 - 01:35 PM

looks good

you know what the final price would be on a full kit?


We haven't decided on the price yet for a full kit as we're not quite sure what everything would be included. But we will naturally offer the bare head with valve seats/inserts and then a fuel injection kit that includes most of the parts needed(intake manifold, trigger wheel, fuel rail, exhaust flanges etc.). How complete the fuel injection kit is really depends on what you guys want.

It's looking like we'll also offer the head anodized to a colour of your choice.

#57 giacomo

giacomo

    Super Mini Mad

  • Members
  • PipPipPipPipPipPip
  • 684 posts
  • Location: Southend/west cliff

Posted 01 February 2013 - 09:20 PM

Sounds promising just hope I can afford it :D

#58 giacomo

giacomo

    Super Mini Mad

  • Members
  • PipPipPipPipPipPip
  • 684 posts
  • Location: Southend/west cliff

Posted 01 February 2013 - 09:20 PM

Sounds promising just hope I can afford it :D

#59 Elmtech

Elmtech

    Passed Test

  • Traders
  • PipPip
  • 30 posts

Posted 03 February 2013 - 06:19 PM

Testing it on some snow :lol:



We actually had it on the road today for some more mapping but there was a bit too much traffic for proper testing.

We also finally managed to print the intake manifold, it just needs a bit of "cleaning" and then it's ready to be installed.

Posted Image

#60 Artful Dodger

Artful Dodger

    " I AM THE SPECIAL ONE"

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 4,435 posts
  • Local Club: aint no body got time fo dat

Posted 03 February 2013 - 06:27 PM

Oh Thats awsome! Inlet looks good!




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users