what mods need doing to the engine compartment if any?..cheers
turbo lump in clubby
Started by
iceman
, May 28 2004 10:22 PM
2 replies to this topic
#1
Posted 28 May 2004 - 10:22 PM
#2
Posted 28 May 2004 - 10:42 PM
You need to cut a whole in you bulk head and weld in a box section to give you more room. You can buy the box sections and instructions from usual mini places.
For further details look on Turbo Phils website. It's in "links" section
For further details look on Turbo Phils website. It's in "links" section
#3
Posted 29 May 2004 - 07:37 AM
Cheers Alburlar ! :grin:
As already said you will need to cut the bulkhead to provide clearance for the Turbo, there's a bit about it on my site - http://www.turbo-min...47257/9602.html
Phil.
PS. There is a new "Turbo" section on here now.
As already said you will need to cut the bulkhead to provide clearance for the Turbo, there's a bit about it on my site - http://www.turbo-min...47257/9602.html
Phil.
PS. There is a new "Turbo" section on here now.
Attached Files
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users