Jump to content


Photo

Budget Sound Proofing - A Quick And Dirty Guide


  • Please log in to reply
25 replies to this topic

#1 Skortchio

Skortchio

    Camshaft & Stage Two Head

  • Members
  • PipPipPipPipPipPipPipPip
  • 1,596 posts
  • Location: Basildon
  • Local Club: EMC

Posted 31 January 2013 - 10:29 PM

On the suggestion of Ruckus, here's a fast run down on how to shut down the noise in your car you don't like so that you can hear better the noise you do like. Be it ICE or induction.


There's 2 things to consider in quietening a Mini - vibration and transmitted noise. You need different tools for each.

If you're on a budget (as I was) then it's possible to do both for around £60 for the whole car.

First thing I did pull everything out the car and after making sure there was no repairs needed or leaks, give every panel a good cleaning and removed the old 'sound proofing' then began by covering all the panels in flashing tape (poor mans Dynamat) this is your mass loading, you're making the panel physically heavier and as a result less likely to vibrate.

Pop your sub in and then play a track with some deep bass / let the engine idle / tap things, find the bits that make a noise and tighten them / tape them / remove them.
Add more vibration and repeat until it all stops buzzing where it shouldn't. As an example, I found that my door lock bars vibrated at certain frequencies which annoyed the bejesus out of me, so they got a small strip of flashing tape slipped behind them.
Because you're only stopping vibration you don't need 100% coverage, start with a strip per panel and work your way up.
I may have gone a little overboard, but you learn these things as you go >_<

Posted Image


Once nothing rattles, you're onto dampening and deadening.
This is where your foam comes in.
There's very posh very good brands but there's also closed cell foam, which isn't branded, IS cheaper and because it's closed cell it doesn't suck up water, just like the posh stuff.
I bought 3m² for mine,10mm thick for the floors, arches and front bulkhead the rest 6mm thick for anything else that caught my gaze!
In this stage you're trying to stop sound waves so a complete covering is more important.

Posted Image

Then topped off with 2 layers of carpet underlay to pick up any high frequencies that slipped by the foam.

An important thing to remember when doing this, or rather after doing this is that when you put everything back in the car make sure it doesn't rattle / vibrate against things. A couple of spanners / can of WD40 on the dashboard can make a hell of a racket :lol:

Here's a list of helpful links and things that you'll need:

Flashing tape(2 rolls of 150mm should be sufficient):
http://www.screwfix....h=flashing tape

Closed cell foam (about 3²m should cover all the cabin with enough to double up on arches/front panel):
http://www.ebay.co.u...=item4609178eea

Carpet Adhesive (for sticking your foam):
http://www.screwfix....equestid=528270

Hair dryer (Be sparing with the heat, flashing tape gets VERY sticky when too warm):
Posted Image

Wooden roller - can make applying flashing tape easier, a bit of scrap wood does just as well (budget remember):
Posted Image

Edited by Skortchio, 01 February 2013 - 11:52 AM.


#2 Noah

Noah

    Up Into Fourth

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 4,136 posts
  • Location: NE London/Essex
  • Local Club: Essex Mini Club

Posted 31 January 2013 - 10:34 PM

Good guide.... I've found my main vibration is actually the steering wheel/column from my exhaust whoops.

#3 kappa

kappa

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,301 posts
  • Local Club: Middlesex Mini Club

Posted 31 January 2013 - 10:38 PM

This is good to know

#4 steven

steven

    One Carb Or Two?

  • Banned from Buying/Selling
  • PipPipPipPipPipPipPip
  • 1,195 posts
  • Location: Uk

Posted 31 January 2013 - 11:04 PM

do you use the same stuff to cover the holes in the doors ?

#5 Skortchio

Skortchio

    Camshaft & Stage Two Head

  • Members
  • PipPipPipPipPipPipPipPip
  • 1,596 posts
  • Location: Basildon
  • Local Club: EMC

Posted 31 January 2013 - 11:27 PM

I haven't covered the holes in my doors, why would you want to do that?
I'm stopping sound getting in not out :P

#6 Ruckus

Ruckus

    Ice Ice Baby!!!

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 2,071 posts
  • Location: Top of the hill in Kent
  • Local Club: SMOC

Posted 31 January 2013 - 11:28 PM

Ace guide.

Will request to be pinned. :D

#7 steven

steven

    One Carb Or Two?

  • Banned from Buying/Selling
  • PipPipPipPipPipPipPip
  • 1,195 posts
  • Location: Uk

Posted 31 January 2013 - 11:30 PM

thought it would help >_<

#8 ad53ggz

ad53ggz

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 384 posts

Posted 01 February 2013 - 08:55 AM

Where did you get your closed cell foam from?

#9 Skortchio

Skortchio

    Camshaft & Stage Two Head

  • Members
  • PipPipPipPipPipPipPipPip
  • 1,596 posts
  • Location: Basildon
  • Local Club: EMC

Posted 01 February 2013 - 11:17 AM

I bought mine from ebay, seller was called dobble0_0 I think. You might find cheaper locally or with some more searching.

I've updated the first post with some links. :-)

#10 kappa

kappa

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,301 posts
  • Local Club: Middlesex Mini Club

Posted 01 February 2013 - 11:32 AM

May I ask how much flashing tape and how much underlay has been used?

#11 Skortchio

Skortchio

    Camshaft & Stage Two Head

  • Members
  • PipPipPipPipPipPipPipPip
  • 1,596 posts
  • Location: Basildon
  • Local Club: EMC

Posted 01 February 2013 - 11:47 AM

I used waaaaay too much flashing tape, haha! But I was a n00b and learnt from it.
2 rolls should be sufficient to load up all the panels, I've updated the top post to reflect that you don't have to blanket the car in the flashing tape only add enough per panel to stop them buzzing.

Underlay was just an offcut, think it was 2m² and the guy in the shop gave it to me for free :D

#12 kappa

kappa

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,301 posts
  • Local Club: Middlesex Mini Club

Posted 01 February 2013 - 11:50 AM

Oh excellent that is a big help,

Cheers Skortchio

Regards

Bobby

#13 ad53ggz

ad53ggz

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 384 posts

Posted 01 February 2013 - 01:57 PM

Thanks

#14 Ruckus

Ruckus

    Ice Ice Baby!!!

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 2,071 posts
  • Location: Top of the hill in Kent
  • Local Club: SMOC

Posted 04 February 2013 - 05:33 PM

mmm i think the mod team have miss-understood my request for the thread to be pinned... in the Ice section where is was first posted..
The target audience was really the car audio minded, and although it does also fit in the interior section, I think you've missed the point...

#15 miniallsort

miniallsort

    Up Into Fourth

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 4,723 posts

Posted 07 February 2013 - 06:38 AM

Great guide thanks very much think I'm going to go for the flash tape and silent coat




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users