Jump to content


Photo

76 Clubman Estate Dropped


  • Please log in to reply
137 replies to this topic

#61 meetthespeakers

meetthespeakers

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 366 posts
  • Location: Annapolis, MD
  • Local Club: MAM, CMR

Posted 27 August 2014 - 02:26 PM

What's the plan for the old interior, I thought it looked sweet.

 

I'm not replacing the Estate's interior, I am replacing the seats in the Trabant. I dyed the rear seat black 2 years ago, and the fronts have 80's seat covers that have splashes of green, pink, gray, etc on them. Trabant needs a fair amount of work to get it where I want it to be, but I only have a month for phase 1, and another month after that for phase 2. The Estate I just need to fix the passenger window, and tune the new hif38 I put on it. 



#62 love333

love333

    On The Road

  • Noobies
  • PipPip
  • 48 posts
  • Location: Boston, Lincs

Posted 25 September 2014 - 07:47 PM

Well I finally bit the bullet and upgraded to Accuair with 1/4" NPT Fittings. Before I had just a front/back setup with no tank, just compressor. So I got a 2 gallon tank coming and a single viair 275c compressor. I'm gonna use my old 7 switch box with dual needle gauges in the dash from my Old Van. The whole reason was I wanted to test my theory first, which while the air works on the Mini I was having a problem with it tipping over at lower pressures, basically anything under 75psi or so, and at that pressure it is in 4x4 mode. I imagine it was just due to load transfer. First time I pulled out the driveway at what I would consider "ride height" the car leaned to the right, and stayed there. Hoping this will alleviate that, because I don't want to drive monster truck height. I also picked up another set of 10x7 wheels to have as a spare wheel, but now I am thinking about running these on one side and painting the center black, and using the left overs as a spare....
 
2014-05-07+21.15.08.jpg
Accuair with 1/4 PTC fittings.
 
Fotor05087595.jpg
7 Way switch box
 
Fotor050875837.jpg
Fun Stuff
 
10x7douglaswheels.jpg
 

 

Awesome thread buddy much love !

what wheels are these at the bottom ?



#63 meetthespeakers

meetthespeakers

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 366 posts
  • Location: Annapolis, MD
  • Local Club: MAM, CMR

Posted 25 September 2014 - 07:53 PM

They are douglas race wheels. I still haven't mounted any tires on them because I wanted to verify their load rating. I am sure they are fine, but wanted to double check. I was gonna use them as a spare. 



#64 meetthespeakers

meetthespeakers

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 366 posts
  • Location: Annapolis, MD
  • Local Club: MAM, CMR

Posted 25 September 2014 - 07:59 PM

Finally back on the road... and driving it to work again.

 

20140918_094256.jpg

 

Finally got to install the Maniflow LCB, head fitment... great... y pipe sucked a big one, was kinda surprised. 

 

20140916_222528.jpg

 

 

So, I decided to try out some Protechs coilovers for a bit, got to say... love them so far.

 

20140915_193538.jpg

 

20140916_200612.jpg

 

 

 

 

Not pretty, but functional, just made a 500 mile trip with it last weekend.

 

20140917_224528.jpg

 

Pics from the recent swap meet...

 

10389301_10152293605560443_2313902024607

 

10600375_10152293617410443_6159328756779

 

10653754_10152293605905443_6485760952167

 

10481685_10152293617835443_8805945107308

 

10703544_10152293617995443_1585868982162



#65 SAL 821X

SAL 821X

    Camshaft & Stage Two Head

  • Members
  • PipPipPipPipPipPipPipPip
  • 1,890 posts
  • Location: Hinckley
  • Local Club: Leicester Mini Owners Club

Posted 26 September 2014 - 08:56 AM

This thread needs video! lots of Air Ride videos! 

 

I want to see it bounce.....



#66 megamini_jb

megamini_jb

    Crazy About Mini's

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 5,491 posts
  • Name: Jamie
  • Location: -

Posted 26 September 2014 - 08:59 AM

Love the pic of you guys standing around it. shows how low it really is where the roof line comes up against you

Edited by megamini_jb, 26 September 2014 - 09:01 AM.


#67 meetthespeakers

meetthespeakers

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 366 posts
  • Location: Annapolis, MD
  • Local Club: MAM, CMR

Posted 19 December 2014 - 09:45 PM

Well it's been a while... had the fuel pump go out nearly a month and a half ago. Hadn't really had time to do anything with it. But I finally pushed the Mini into the garage and started ordering some winter projects. The biggest being a SC12 supercharger. There were some other odds and ends I have been wanting to try out, so I ordered a new dash, T7 heater, new switches, a variety of different sound deadening products, a SU Electric type style pump, a Freeflow header to replace the LCB.. to name a few things.
 
Lets start with the heater, I wanted a more compact modern unit that could be multispeed. I love the space it freed up.
 
20141206_205218.jpg
 
20141206_203407.jpg
 
After assembly, I tapped a new hole for the wires to come out because I did not want to see them hanging down.
 
20141211_153512.jpg
 
20141216_201808.jpg
 
20141216_201933.jpg
 
20141216_201855.jpg
 
20141216_201623.jpg
 
The start of the new switch panel
 
20141217_212748.jpg
 
Mocking it up
 
20141217_212021.jpg
 
The new switch panel painted in black wrinkle. The headlight switch is Off/on/on, heater switch is all the way to left and is off/hi/lo. Rest are just off/on. I think it turned out decent.
 
20141218_203549.jpg
 
20141218_203523.jpg
 
20141217_213946.jpg
 
20141208_211845.jpg
 
20141217_205030.jpg
 
The SC12 Supercharger
20141210_201609.jpg



#68 Chris1992

Chris1992

    Up Into Fourth

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 2,022 posts
  • Location: Essex

Posted 20 December 2014 - 02:45 PM

20141210_201609.jpg

 

this project just entered a whole new world of awesome!



#69 Jared Mk3

Jared Mk3

    Has a small thing but it does make a difference

  • Members
  • PipPipPipPipPipPipPipPip
  • 1,974 posts
  • Location: Kokstad, South Africa
  • Local Club: MOCKZN

Posted 20 December 2014 - 04:15 PM

 this project just entered a whole new world of awesome!

 

Agreed!



#70 meetthespeakers

meetthespeakers

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 366 posts
  • Location: Annapolis, MD
  • Local Club: MAM, CMR

Posted 22 December 2014 - 02:05 PM

I am equally as excited. After dabbling with Suzuki and Honda swaps, I just didn't want to go there with the clubby this time. The 1098 just runs so great, but after having it a few years sadly I want something to shake it up and keep me interested. Honestly I wanted a little more grunt, and of course something a little different. It's gonna take some time sadly because I am working on building a new 24'-32' shop in a few weeks hopefully. And I have my hands full with the Morris Minor and getting that one back on the road. 

 

Oh I also installed this last night on the inside firewall. 3/4" thick boom mat. Made for sound insulation under hood, but I think it will work well on the firewall to keep induction down a hair.

 

20141220_105212.jpg


Edited by meetthespeakers, 22 December 2014 - 02:30 PM.


#71 meetthespeakers

meetthespeakers

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 366 posts
  • Location: Annapolis, MD
  • Local Club: MAM, CMR

Posted 22 December 2014 - 06:52 PM

I thought this was a cool picture, sadly I took it.... ohhhhh 2-3 months ago. Can't wait to take it down to the docks again in spring, maybe over the winter... SALT permitting of course.

 

 

downbythedock.jpg



#72 freaker

freaker

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,378 posts
  • Location: zeebrugge
  • Local Club: mini fun club belguim

Posted 22 December 2014 - 07:07 PM

in one of the pictures of the swap meet, is that a center console for an estate ? 

 

freaker



#73 meetthespeakers

meetthespeakers

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 366 posts
  • Location: Annapolis, MD
  • Local Club: MAM, CMR

Posted 22 December 2014 - 07:09 PM

in one of the pictures of the swap meet, is that a center console for an estate ? 

 

freaker

 

Well, it's not for an Estate only, it was mainly designed I assume for Mini Saloons, but it works all the same. I ended up trimming about an 1.5" off the bottom to get it to sit lower on the tunnel. You can just see it in this picture:

 

20141216_201623.jpg



#74 minimissions

minimissions

    Up Into Fourth

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 3,427 posts
  • Location: North West
  • Local Club: M.M.O.C

Posted 23 December 2014 - 12:30 PM

Some wicked looking pics there of your clubby estate does just look stunning :)



#75 java gt

java gt

    Mini Mad

  • Just Joined
  • PipPipPipPip
  • 120 posts
  • Local Club: Irish Mini Owners Club

Posted 27 December 2014 - 09:11 PM

Love the wheels,really suit the Clubbie.






1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users