Baldric The "rally" Clubman

More photos from the spray shop. The ones in grey are when the primer has been flatted and then the black are when the base coat has been applied. I think it is starting to look good, but if am getting very worried about the re-build and scratching shiny paint!

Looks great !

That's a shiny looking basecoat...!! Very nice!

Looking fantastic!!!!

 

At least the rear cage is already in so thats one less thing to wrestle with and scratch the lovely new paint!!!       

Looking fantastic!!!!
 
At least the rear cage is already in so thats one less thing to wrestle with and scratch the lovely new paint!!! >__< >__<

Indeed. The front cage is simples, but there was no way I was taking the rear cage back out. I remember only too well the grief of trying to get it in in the first place

Yeh, both my cage and car have scars from fitting!!!!!!  nothing is ever easy in a little mini are they?

Looking good. Certainly a really good shell you've got there for the basis of the project :)

This pic is a bit out of order, but this is what I found at the back of the car a few weeks back when we were doing a bit of welding.

Another batch of photos arrived from the spray shop. Apparently they needed to do some more prep on the base coat!
My daughter says it looked like a cow (and that is from an 18 yr old A level student), but then it goes back to black including the inside now as well!

Has also cost me a new fibreglass bonnet as the old one turned out to be a bit worse for wear and not good enough for a quality finish!

Really starting to wonder whether I will be able to bring myself to take it out and get mucky!

that shine is sexual

project looks good

final photos from the spray shop

final photos from the spray shop

Car came back from spray shop a couple of weeks ago. Really pleased with the job that Simon Norman's team at 2Refinish at Hinckley in Leicestershire have done. Thank you chaps!

Unfortunately it came back before I had finished the decorating and other DIY jobs, but hope to be starting on putting it all back together in the next week or so.

Must confess to being a bit scared of scratching it and think will need more new parts as will not be able to put rusty mucky bits on to this very shiny shell.

Will try and keep the posts more regular!

Well so much for keeping the posts more regular!

DIY and summer hols seemed to get in the way until a couple of weeks ago when we fitted the fibreglass boot lid complete with late type seal and new boot lock. Although I haven't got a metal booted mini to hand to compare fit. I must say I am quite impressed with this boot lid.



And this one demonstrates it is hard to take a photo without a reflection!