Copied from 16vminiforums, will update a little later
Its time I got my rear into gear and finish this, so it makes sense to start a project page!
I bought this early this year, from HARBER07 on here. Since then, aside from making a half finished exhaust manifold for it and taking the coilovers off, not a lot has gone on.
Here is a link to Harber's project page http://www.16vminicl...ead.php?t=29754
On the trailer home
Mocking up for the inlet manifold, hopefully be contacing BoggBrothers in the new year to get one made up.
Was not really happy with the angle the top arm was sitting at with the coilovers. Also, the coilovers were directly mounted to the fibreglass! Could have made this work, but have put dampers and rubber cones back in for now.
Things that I need to get sorted next are;
- Driveshafts
- Inlet Manifold
- Exhaust Manifold
- ECU
The thing I am most stuck with at the moment is the ECU. I'm just not sure what to go for.
I know people say to go for a ECU which a local rolling road prefers, but I have not really looked into which rolling road to use yet.
Although I have been looking between MegaSquirt and VEMS. Currently leaning towards VEMS but any advice is most welcome!
Will try and update this with some more pictures when I get some work done on it!