How Do You Fit Those Chrome Window Seal Strips
Best Answer Cooperman , 28 February 2015 - 01:24 PM
When you tap the strip onto the clips make sure the window glass is wound fully down. I had a window glass which was about 1 mm too high and when I tapped it with a rubber mallet, guess what. DOH .
Go to the full post#1
Posted 28 February 2015 - 01:06 PM
Do you push the clips on first....or slide the clips into the moulding then push the whole lot on together..
#2
Posted 28 February 2015 - 01:09 PM
Slide clips into channel - equally space them with one at each end and then push down firmly. Persuade with a rubber mallet if needed.
#3
Posted 28 February 2015 - 01:24 PM Best Answer
When you tap the strip onto the clips make sure the window glass is wound fully down. I had a window glass which was about 1 mm too high and when I tapped it with a rubber mallet, guess what. DOH .
#4
Posted 28 February 2015 - 01:26 PM
#5
Posted 28 February 2015 - 03:05 PM
When you tap the strip onto the clips make sure the window glass is wound fully down. I had a window glass which was about 1 mm too high and when I tapped it with a rubber mallet, guess what. DOH .
You swore ha
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users