Finished painting the inside stripped underside and got a coat of primer on also rebuilt drive shafts
1.8 K Turbo Round Nose
Started by
jackjewelljj
, Nov 20 2015 09:57 PM
223 replies to this topic
#17
jackjewelljj
-
- Members
-
- 241 posts
Mini Mad
- Location: chard
Posted 28 December 2015 - 06:29 PM
Started putting top coat on underside ran out of stone chip 
so made a start on rebuilding the engine also picked up some cooper s brakes
so made a start on rebuilding the engine also picked up some cooper s brakes
Attached Files
-
WP_20151224_11_48_08_Pro.jpg 28.07K
21 downloads
-
WP_20151228_15_45_06_Pro.jpg 30.12K
23 downloads
#18
jackjewelljj
-
- Members
-
- 241 posts
Mini Mad
- Location: chard
Posted 29 December 2015 - 07:58 PM
Finished painting the underside today and got the rear beam fitted
Attached Files
-
WP_20151229_17_06_18_Pro.jpg 47.23K
66 downloads
-
WP_20151229_17_06_43_Pro.jpg 40.28K
28 downloads
#19
jackjewelljj
-
- Members
-
- 241 posts
Mini Mad
- Location: chard
Posted 30 December 2015 - 07:19 PM
Put the type b LSD in today, now cant get the gearbox casing back together!!! Given up
#20
Broomer
-
- Members
-
- 1,771 posts
Camshaft & Stage Two Head
Posted 30 December 2015 - 07:55 PM
Those coilovers are going to bind.
#21
jackjewelljj
-
- Members
-
- 241 posts
Mini Mad
- Location: chard
Posted 30 December 2015 - 08:25 PM
What do you mean? Is that why they make a weird noise?
#22
Broomer
-
- Members
-
- 1,771 posts
Camshaft & Stage Two Head
Posted 30 December 2015 - 08:32 PM
Yeah those coilovers are no where near as good as the standard suspension.
#23
jackjewelljj
-
- Members
-
- 241 posts
Mini Mad
- Location: chard
Posted 30 December 2015 - 08:34 PM
Oh I've aslo booked the iva for July 2016
#24
Broomer
-
- Members
-
- 1,771 posts
Camshaft & Stage Two Head
Posted 30 December 2015 - 08:35 PM
What size exhaust you going to run?
#25
jackjewelljj
-
- Members
-
- 241 posts
Mini Mad
- Location: chard
Posted 30 December 2015 - 08:35 PM
4.5 inch from turbo
#26
Broomer
-
- Members
-
- 1,771 posts
Camshaft & Stage Two Head
Posted 30 December 2015 - 08:38 PM
4.5 inch from turbo
That's good, 4.5" is the minimum you need, I would prob have 3 tail pipes with 8" exits for optimum exhaust flow.
#27
jackjewelljj
-
- Members
-
- 241 posts
Mini Mad
- Location: chard
Posted 30 December 2015 - 08:40 PM
What about straight out the bonnet with a flap on top?
#28
thelegg
-
- Members
-
- 601 posts
Super Mini Mad
- Location: Forton
Posted 30 December 2015 - 10:23 PM
Iva test ? Why?
#29
jackjewelljj
-
- Members
-
- 241 posts
Mini Mad
- Location: chard
Posted 30 December 2015 - 10:27 PM
Was only messing around cant be bothered with that
#30
thelegg
-
- Members
-
- 601 posts
Super Mini Mad
- Location: Forton
Posted 30 December 2015 - 10:49 PM
Lol, you painting your engine block n stuff ?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
