Hope you guys had help, when I was cutting away the rest of the sills and cross member I knew the floor was going to need doing thought it would just be a section in the middle but turns out the whole thing was shot so I picked up a http://www.minispare...|Back to search nearside whole floor only trouble is im struggling to get it to line up I have a 87 Mayfair and the centre tunnel is curved but the floor is flat edged, is this a feature of the whole floors and I'm going to need to do some bending or have I got the wrong floor... thanks in advance
Full Near Sode Floor
Started by
Slackda
, Jul 27 2017 07:50 PM
2 replies to this topic
#1
Posted 27 July 2017 - 07:50 PM
#2
Posted 27 July 2017 - 09:15 PM
You will need to bend the floor to meet the tunnel if the floor is damaged right up to the tunnel.
If not, cut the old floor away leaving a section of the floor beside the tunnel where it is flat and join it in there if that makes sense
#3
Posted 27 July 2017 - 09:57 PM
Yeah makes sense looks like the floor has been replaced before and a lot cut out. Thanks
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users