Could i raptor the underside of an spi without stripping the old underseal off? got a low mileage car with what looks like original underseal on, could i wire brush off any loose areas, and roller over or is there a good chance it will react? want to do all arches, underside and boot area
Raptor Underside
#1
Posted 28 January 2018 - 06:01 PM
#2
Posted 28 January 2018 - 06:03 PM
#3
Posted 28 January 2018 - 06:22 PM
old underseal
#4
Posted 28 January 2018 - 06:25 PM
Old underseal would have to come off. Seam sealant needs to be checked as rust can and will get under it especially if its original.
#5
Posted 28 January 2018 - 07:17 PM
so i would have to completely remove the old underseal, prime and then raptor?
#6
Posted 28 January 2018 - 07:28 PM
so i would have to completely remove the old underseal, prime and then raptor?
Yes is the answer here. Don't be tempted to spray over old underseal. As i found on my Clubby which had been Ziebarted from new, rust will get in random places. This would need to be sorted before anything or you will be wasting your time and money.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users