I have just fitted an electronic ignition distributor to my 1989 mini 998.
I have a spare coil from my 1991 Cooper, should I use the Cooper coil or keep the existing coil on the car?
Thanks
Which Coil For Newly Fitted Electronic Ignition Distributor
Started by
minitalia1275
, Jan 03 2019 12:19 PM
3 replies to this topic
#1
Posted 03 January 2019 - 12:19 PM
#2
Posted 03 January 2019 - 12:24 PM
#3
Posted 03 January 2019 - 12:25 PM
You need an electronic coil to go with the electronic distributor. if your wiring loom has a ballast resistor wire(pink/white) for coil positive I'd advise to remove this and fit a standard 12v wire.
#4
Posted 03 January 2019 - 01:08 PM
Ok thanks, I will fit the coil (electronic ignition) from my Cooper.You need an electronic coil to go with the electronic distributor. if your wiring loom has a ballast resistor wire(pink/white) for coil positive I'd advise to remove this and fit a standard 12v wire.
Edited by minitalia1275, 03 January 2019 - 03:20 PM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users