Has Anyone Made Repair Sections To The Lower Bulkhead
Started by
gem1
, Jun 10 2019 07:36 AM
18 replies to this topic
#16
Posted 20 June 2019 - 07:33 PM
Started to fit it
#17
Posted 20 June 2019 - 08:54 PM
Lots of fettling ect to get a nice fit
#18
Posted 22 June 2019 - 06:22 PM
Having a problem with the inner wings at the bottom where they meet the toe board they seem almost to short in height
With the inner wing bolted to the bulkhead x member usinh the two top shock mounting holes had to really push pull self tap per to the toe board then wrestle to get the shock mount holes lined up
With the inner wing bolted to the bulkhead x member usinh the two top shock mounting holes had to really push pull self tap per to the toe board then wrestle to get the shock mount holes lined up
#19
Posted 22 June 2019 - 06:23 PM
Having a problem with the inner wings at the bottom where they meet the toe board they seem almost to short in height
With the inner wing bolted to the bulkhead x member usinh the two top shock mounting holes had to really push pull self tap per to the toe board then wrestle to get the shock mount holes lined up
With the inner wing bolted to the bulkhead x member usinh the two top shock mounting holes had to really push pull self tap per to the toe board then wrestle to get the shock mount holes lined up
Attached Files
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users