My mini is a 1994 Mayfair so has a standard 1275 engine.
Attached Files
Edited by Alphaboat, 03 November 2020 - 09:14 AM.
Posted 03 November 2020 - 09:10 AM
Edited by Alphaboat, 03 November 2020 - 09:14 AM.
Posted 03 November 2020 - 09:14 AM
The balancing cut outs are standard from the factory. As is the cut out to clear the dizzy drive.
Posted 03 November 2020 - 10:50 AM
You'll find that the semi-circular cutting on the webs are to clear the Distributor drive and the more square cut outs were for clamping the crank in the factor to drill the Oil ways - if this is what you are referring to.
The Big End Journal does appear to have some wear in it, it's likely the Crank will need a Grind.
Posted 03 November 2020 - 01:58 PM
Mini Technical Sections →
Problems, Questions and Technical →
Piston Rings - A-Series 998 Engine - Help RequiredStarted by WanaGo , Yesterday, 07:59 AM engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Exhaust Choice 45Dcoe - Rc40?Started by lachlan1275gt , 13 Apr 2024 engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
1071 Main Bearing Caps.Started by 246jaenick , 02 Apr 2024 engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Misfire - Ignition Fault Or Fuel Problem?Started by derekaka2sheds , 01 Apr 2024 electrical, engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Which Rocker ArmsStarted by mark the diver , 30 Mar 2024 engine |
|
|
0 members, 0 guests, 0 anonymous users