Instrument Fascia / Binnacle / Pod Measurements

Hi, wondering if anyone could let me know the measurements (width, height, depth, hole diameters etc) of the classic mini centre instrument pod / fascia.  Looking to design and 3d print one to save a few dollars.

 

Any help is greatly appreciated.

 

 image.axd.jpg   10.08K   2 downloads

Edited by Cornholio351239, 20 November 2020 - 06:26 AM.

I do have a spare one that I can measure up.

So just to be clear: you want to biuld the whole binacle and need all measurements for it?

I measured things up and I draw it up in visio. Can provide that file but I also made correct scaled PNG files (300 and 600DPI) and a SVG file (for you to import into your 3D design .

Here is an example:

 

and a quick sketch of the side view (with measured angles and bulkhead maximum length from bottom to top:

 

 

 

Please send me your email address via PM, than I can send you the original (on scale) drawings (in .PNG and .SVG format)  I made for you this evening as the forum doens not allow me to place them here or to post a link to them..

(please let me know if this helps...)

Edited by Johnmar, 20 November 2020 - 07:20 PM.

Mate that's awesome. I'll pm you for the files!