Hello
I'm removing the flywheel cover (Wok) to get the flywheel and clutch out
To then get the clutch housing off
To replace clutch housing oil seal and the gasket between the clutch housing and the engine / gearbox
It's leaking oil
Getting to the point....
Of the 8 (I think) bolts that hold the Wok to the clutch housing, I've removed 6
There are still 2 that I'm struggling with
The 2 at the bottom
I've tried from above and from under the car
From under the car, the front subframe is in the way
From the top, the wok itself gets in the way
Any tips, suggestions, special tools?
My swear jar is full
I'm starting a swear barrel
Thanks all