Hi guys, I have a 1992 Mini Cooper with a hif44 carb last of the carb models. Changed the radiator today to a fletcher and brought the fletcher hoses. Everything went back together a treat however I can’t get the hose onto the water pump for love nor money. To me it’s as if the hose is too thick and it’s fowling on the timing chain cover. I can get it on a bit but not far enough down. I’ve used dish soap to live it up but it still won’t budge. I can’t see how I’d get the hose on and then a jubilee clip either as it’s very tight. Any tips or ideas would be appreciated I’m sure it’s probably something very simple I’m missing but after two hours tonight I could not get the thing on. Thank you
No replies to this topic
Also tagged with one or more of these keywords: engine
Mini Technical Sections →
Problems, Questions and Technical →
Piston Rings - A-Series 998 Engine - Help RequiredStarted by WanaGo , 18 Apr 2024 engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Exhaust Choice 45Dcoe - Rc40?Started by lachlan1275gt , 13 Apr 2024 engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
1071 Main Bearing Caps.Started by 246jaenick , 02 Apr 2024 engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Misfire - Ignition Fault Or Fuel Problem?Started by derekaka2sheds , 01 Apr 2024 electrical, engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Which Rocker ArmsStarted by mark the diver , 30 Mar 2024 engine |
|
|
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users