Just wondering if anyone uses the Aldon Amethyst on here and if they could help with a base map setting to get my 1275 supercharger started and running before rolling road ?
It’s a suck through set up running 8-9psi.
I’ve set the static timing at 5 degrees BTDC as per the Hayes manual to hopefully enable the car to start and locked the mechanical advance as per instructions.
Amethyst unit has an offset option which I believe I input the 5 degree initial advance into.
Any help would be much appreciated.
Help With Map Settings For Aldon Amethyst
Started by
sam138
, Oct 24 2021 09:47 AM
1 reply to this topic
#1
Posted 24 October 2021 - 09:47 AM
#2
Posted 24 October 2021 - 12:59 PM
Disable the fuel and use a light to check the timing is what you expect before trying to start it or adjust any offsets would be my advice,although I am not personally familiar with this setup.
It is good practice to do this with any programmable system.Incorrect timing can destroy boosted motors in minutes.Enjoy,Steve..
It is good practice to do this with any programmable system.Incorrect timing can destroy boosted motors in minutes.Enjoy,Steve..
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users