36 replies to this topic

[minisprint]

my next project is to fit hydraulic suspention to my zeemax mini.heres a pic of the kit.and the car

[minisprint]

got some work done to the car today got all the rams fitted and made a start on the routing of the pipe work!involves drilling 4x 1 nch holes :'( .but done this sucesfully!!also made a start on the wiring tonight!it looks a nightmare!!

[JA1987]

nice lookin car mate, just wondering where youve put the pump for the
hydraulics? Also how are you fitting the hydraulic system have you had
to do a lot of reinforcing?

[Purtsi]

Now this looks interesting.. please post some project pics How low are u going to go?

by the way. is that hydraulics kit made for mini or is it just a bulk kit?

[minisprint]

Now this looks interesting.. please post some project pics How low are u going to go?

by the way. is that hydraulics kit made for mini or is it just a bulk kit?

the kit is for a mini the pump goes oppersite the petrol tank! it will go all the way down on the front untill its on the bump stops!and the rear bottoms out on the shockers before hitting the arch! its just about done but just need to get my self a 100amp battery to run the pump!

[Purtsi]

Sounds good, although I thought that you'd go right to the ground with those hydraulics that would look sooo cool in shows

[JA1987]

Got anymore pictures of the project? Would love to see it when its sat
on its arse.

[Andykettle]

You figured out the wiring yet? You have enough diodes? Where did you mount your Solinoid/relays?
Are you going to leave it at work so i can take a look tomoz.

[minisprint]

heres another pic.i managed to get it moving tonight!!

Edited by minisprint, 18 November 2010 - 10:03 PM.

[minisprint]

heres a pic of the pump and valves in the boot just a bit more tidying and its done!!

[biggav]

where did you get the kit from?? i've been considering hydraulics... though not too seriously as my priority is getting the car on the road.

[minisprint]

where did you get the kit from?? i've been considering hydraulics... though not too seriously as my priority is getting the car on the road.

rayvern hydraulics

[minisprint]

fitted my new stereo mini is finally getting there!

got it from halfords with 200 pounds off in the sale!it is a jvc with dvd player and 3.5mm screen!just got to find somewhere for the ps2!

[TJenkos]

Looking good. Them stereos are very recommended!

[minisprint]

Looking good. Them stereos are very recommended!

seems a good unit!got a maze of wires for allsort out the back! also got some new speakers for the mini i got 6.5 inch components for the front and back and a 10 inch sub for the boot!