Community Status Updates

Rosslin Racing

try WD40 or Waxoyl that work well on dizz caps

Sep 17 2013 10:19 PM

Kieranlee999

huh?
Sep 18 2013 07:59 AM

Kieranlee999

@iain yep :)
and i dont think iwould get away with it
Sep 16 2013 09:54 PM

IainStallard

The wiring for mine was pretty simple, just cut off the side light and use good bullet connection (not the crappy ones supplied) and wire on the new one.
The hardest part for me was putting the light back on with the fiddley screws!
Sep 17 2013 05:40 AM

Kieranlee999

something is shorting it out the light is fitted
Sep 17 2013 07:21 AM

IainStallard

The brackets bolt onto the front valence. If you take the bumper off, then the bracket bolts onto the flat bit underneath, and the flat surface just below the grill. The spots then bolt onto the bracket. Depending on the year of your car, you might not need to drill holes as they were pre-drilled (They were on my 1995 anyway)
Sep 12 2013 01:07 PM

Kieranlee999

its a 1989 mini thirty so i dont know lol :) but ill have a look at home and then i might order them in chrome they look nice :) i think a late birthday present from me to me lol :)
Sep 12 2013 01:12 PM

IainStallard

If there are 2 rubber grommets underneath the grill then you won't need to drill any holes :)
Sep 12 2013 02:59 PM

Archived4

Good point. Faceplam moment for me.
Sep 10 2013 05:58 AM

MiniGrin

If I were you just to be safe put some plastic/wood over it, but i dont think its an issue.
Sep 10 2013 11:39 AM

Kieranlee999

ill put a bit of wood over just to be safe im not fussed if it is flat in the boot theres not going to be anything in most of the time :)
Sep 10 2013 12:42 PM

[email protected]

But one of these www.minispares.com/S46898B.aspx

Sep 09 2013 09:52 AM

Kieranlee999

Thats a dead link.
Sep 09 2013 12:46 PM

[email protected]

DOH! www.minispares.com/S4698B.aspx

Sep 09 2013 12:58 PM