Jump to content


Community Status Updates


Photo

HollyBaby

Viewing 3 houses this weekend, fingers crossed there will be something we like! Main criteria has been - does it have a garage?! If not, we build...
Jan 09 2013 09:00 AM
  • Artful Dodger's Photo
    Artful Dodger
    *gardens must all be viewed as possible foundation for bigger garage:P
    Jan 09 2013 09:06 AM
  • HollyBaby's Photo
    HollyBaby
    Oh yes! Will be a necessity!
    Jan 09 2013 12:21 PM
Photo

Artful Dodger

Goin to get some Nuts.. And bolts!
Jan 09 2013 08:40 AM
  • steven's Photo
    steven
    lost your nuts ?....
    Jan 09 2013 03:06 PM
  • Artful Dodger's Photo
    Artful Dodger
    No need some big ones! (true story! Need some M20 nuts!) havnt got any! :D
    Jan 17 2013 12:55 AM
Photo

Klevdo2202

Magic Carpet Ride - Steppenwolf
Jan 08 2013 11:16 PM
Photo

RyanBebo

Going to order some parts tomorrow, need to sort the minski!
Jan 08 2013 11:08 PM
Photo

minilee94

Come guys i need to know ASAP its going to sell soon whats a 12g938 head
Jan 08 2013 10:12 PM
  • minilee94's Photo
    minilee94
    So it same head as what i have but better it has 11 studs and double valve springs
    Jan 08 2013 10:18 PM
  • Artful Dodger's Photo
    Artful Dodger
    nice, does it have the stamped 12G938 as per the link? muct have been drilled by someone who was building a go engine, hence double V springs! whats the porting work like if any??
    Jan 08 2013 10:21 PM
  • minilee94's Photo
    minilee94
    Im not sure just guna get pics now
    Jan 08 2013 10:42 PM
Photo

Pitcrew6464

Loving driving my mini after years of restoration!
Jan 08 2013 10:00 PM
Photo

Artful Dodger

still looking for a cheap lathe.. anyone got one lying around?? :P
Jan 08 2013 09:57 PM
  • rally515's Photo
    rally515
    Ha ha best of british bodging,If you decide to go ahead with it please make a project thread,would be brill & help others wanting a lathe but on a budget
    Jan 08 2013 10:28 PM
  • Artful Dodger's Photo
    Artful Dodger
    Course!
    Jan 08 2013 10:30 PM
  • rally515's Photo
    rally515
    I'll start you off step 1)Buy this: http://www.ebay.co.uk/itm/Single-phase-240v-2-2kw-motor-for-sawbench-lathe-compressor-pump-etc-/170970100385?pt=UK_BOI_Electrical_Components_Supplies_ET&hash=item27ce9cb2a1

    Step 2) search for lathe gearing......;)
    Jan 08 2013 10:33 PM
Photo

a_woolhouse

Trying Get The Mini Ready For Bingley....It's Not Going Well! :/
Jan 08 2013 09:36 PM
  • WillRunci's Photo
    WillRunci
    take ya time bud ull get there.

    Jan 08 2013 10:36 PM
  • a_woolhouse's Photo
    a_woolhouse
    all depends on the rear subby when it goes for its mot still need put the wheel, caliper and disc back on the passenger side but the brake pipe needs doing first :/ ahh well the joys of owning a mini :P
    Jan 09 2013 09:51 AM
Photo

conlad

I need money desperately :'(
Jan 08 2013 08:17 PM
  • holmesy's Photo
    holmesy
    same
    Jan 08 2013 08:42 PM
  • Pitcrew6464's Photo
    Pitcrew6464
    sell some body parts on ebay ;)
    Jan 08 2013 09:04 PM
  • Noah's Photo
    Noah
    The Police: Roxanne, You don't have to sell your body to the night.....

    JOKE.


    Jan 08 2013 09:19 PM
Photo

brum,brum,mike

So happy! got a new complete floor and a couple of other panels for my mini today! at a good price too :)
Jan 08 2013 06:40 PM
  • Lucas1988's Photo
    Lucas1988
    where you get them from??
    Jan 08 2013 07:23 PM
  • brum,brum,mike's Photo
    brum,brum,mike
    member off here, worked out well :)
    Jan 08 2013 07:32 PM
  • Lucas1988's Photo
    Lucas1988
    is that a trader??
    Jan 09 2013 12:41 AM
Photo

fattail95

Any one got any recommendations for a wire wheel attachment for a drill, to grind some rust off my engine block?
Jan 08 2013 05:46 PM
  • Wise Old Elf's Photo
    Wise Old Elf
    I like the little cup wire brush on my Dremmel.
    Jan 08 2013 08:53 PM
Photo

toyboy396

I go with a Psycho
Jan 08 2013 03:49 PM
Photo

minisi35

Need to pull my finger out and get the mini finished
Jan 08 2013 02:13 PM
  • Artful Dodger's Photo
    Artful Dodger
    Says you!! Mine been going for 3 years now :P
    Jan 08 2013 02:47 PM
  • Deathrow's Photo
    Deathrow
    4 and 3 months here!
    Jan 08 2013 03:56 PM
  • Pitcrew6464's Photo
    Pitcrew6464
    hurry up then ;)
    Jan 08 2013 09:03 PM
Photo

Wise Old Elf

Just found 2 boxes of Mini parts in the garage that I forgot about when I moved garage. Its like Christmas all over again :)
Jan 08 2013 01:08 PM
  • Noah's Photo
    Noah
    Lucky!
    Jan 08 2013 05:44 PM
  • Wise Old Elf's Photo
    Wise Old Elf
    3x dizzys, 3x starters, 2x alternators and lots of plastic and rubber bits that I thought were loss. :)
    Jan 08 2013 06:02 PM
  • Noah's Photo
    Noah
    Thats always use full, I'm spent yesterday, removing the door rubbers, and checking for any cracks. Then I tested them for leaks..... It doesn't leak! The rear windows do but thats because rover cut the seals 2 inches to small.
    Jan 08 2013 07:14 PM
Photo

HollyBaby

I don't understand all this mortgage and new house malarky. Looking to start my venture into the housing market - uh oh!
Jan 08 2013 01:03 PM
  • Wise Old Elf's Photo
    Wise Old Elf
    You borrow £1 and pay back £3 and you can forget nice holidays for at least the next 5 years. LOL
    Jan 08 2013 01:11 PM
  • HollyBaby's Photo
    HollyBaby
    Haha that isn't a problem! On the house I'm looking at it will be £350pm, which is much cheaper than renting in this area plus I will actually be paying money to own something. Nice semi-detatched with garden and garage, 3 bedroom and whatnot. Would hopefully have a good lifeline ^_^ plus being as it's a buyers market and the estate agents have said they can go down on the price is even better!
    Jan 08 2013 01:18 PM
  • Wise Old Elf's Photo
    Wise Old Elf
    WOW that is cheap. Well done.
    Jan 08 2013 01:54 PM