Community Status Updates
This status update has reached the maximum number of replies allowed
konyo
Will my Thirty, with a Stage 1 kit that had been set up on a rolling road pass emissions on an MOT? I take it they set up emissions when RR?
Dec 11 2012 06:42 PM
-
konyo
Yes excatly. I don't know. Last time it failed on emissions i had to get it tuned to pass emissions and it ran like **** until i had it rolling roaded again.. I saw the guy measure the emissions on the rolling road by putting the reader in the exhaust, so i'm guessing it's all set up correctly on emissions?
Dec 11 2012 07:37 PM -
konyo
Maybe we should create a thread? :p
Dec 11 2012 07:38 PM -
dennismini93
if its set up right then the emissions should be ok as well because the fuel will be being burnt in the most efficient way possible. although then again it is a mini lol
Dec 11 2012 10:34 PM
JustSteve
I'm gonna be the kindest person ever and buy my girlfriend a pink mini for christmas ;D <3
Dec 11 2012 06:35 PM
almorgs
does any 1 have a diagram of the pipe work for the r1 mini?? ive bought the silicone hoses from z cars but they have sent me the wrong hoses, they do not have a diagram and they cant work out which hoses im missing.
Dec 11 2012 02:12 PM
-
almorgs
basically the hoses that join from the aluminium pipe to the engine.and around the engine, i have the 2 front silicone hoses for the front. im asking z cars that they have sent me thewrong pipes, but they dont seem to have a clue what pipes and so on, ill have to ring them up again.
Dec 11 2012 04:48 PM -
brum,brum,mike
Hmmm, probably best to ring them, or send zcars steve a message on here. I'll look for some useful pics for you :)
Dec 11 2012 05:26 PM -
almorgs
yea ill give em a bell again, thanks though
Dec 12 2012 02:00 PM
brum,brum,mike
Didn't realise how much dust sanding filler made, i now look like a fat snow man :( Owell, atleast its done now!
Dec 11 2012 12:45 PM
-
charie t
or kindling
Dec 11 2012 03:45 PM -
minimaxie
darn knew I spelt that wrong
Dec 11 2012 04:38 PM -
miniman24
Just about any powder is highly flammable, due to the huge surface area that the flame can reach - also filler dust smells funny :D
Dec 11 2012 04:52 PM
-
brum,brum,mike
to put under the Christmas tree?!
Dec 11 2012 06:12 PM -
minithekid
the frame was to wide lol
Dec 26 2012 09:01 PM
PB Mini Cooper 1.3i
oh well this is guna be expensive quote 210 labour charge for sorting my inner wing fitting arch and bumper :/ guna fit bumper and arch myself. dont suppose if anyone knows how non genuine sportspack arches are to fit ?
Dec 10 2012 08:25 PM
-
PB Mini Cooper 1.3i
Yea thats where mine are from theres in grey so im going to have to get them sprayed in red
Dec 10 2012 09:31 PM -
jaymcefc
hi you can buy the rubber as well to fit the gap between the body and the arch
Dec 10 2012 09:47 PM -
PB Mini Cooper 1.3i
Yea i know fortunately i get that with the one ive ordered which is good i just hope they fit ok because of having the front end damaged but should be straightened up so hopefully wont be to much of a problem to fit :)
Dec 10 2012 11:32 PM
cooperdan
Just thought id say something, nothing really to say to be honest, although id still call it status, as im saying im still here, boring at that yes....So yeh i know...blah blah...But urmm ok lets sayyy... i was compelled to say something at least...shows i maybe care...anyway, Hi
Dec 10 2012 04:51 PM
-
RawlinsGTR
Dan, I'm certain I'm in love with you
Dec 10 2012 05:00 PM -
cooperdan
arnt i the lucky one
Dec 10 2012 09:03 PM
scotty_1987
NCT(MOT) in under two hours now and i wont even be there to see my mini pass lol!!
Dec 10 2012 02:20 PM
-
mattbeddow
or see it fail :P good luck though
Dec 10 2012 04:20 PM -
scotty_1987
well it did fail :(
Dec 11 2012 11:25 AM
