Community Status Updates
This status update has reached the maximum number of replies allowed
Artful Dodger
off to snetterton tomorrow. dads getting back in a racer after 30 years, last was in a touring car. lets see how he gets on!
Nov 16 2012 10:57 PM
-
Artful Dodger
why?
Nov 16 2012 10:46 PM -
MaxAndPaddy
logo comp!...get with it
Nov 16 2012 10:54 PM -
Artful Dodger
what one did they do?
Nov 16 2012 10:55 PM
-
Midas Mk1
Im just watching pulp fiction aha
Nov 16 2012 09:51 PM -
jaydee
...uma...
Nov 16 2012 11:00 PM
MentalMini
passed the theory and hazard perception testI had to resit them due too speeding :)
Nov 16 2012 07:57 PM
-
minilee94
On things like the forum
Nov 16 2012 07:18 PM -
sledgehammer
I used to work for Kent Cam's (80's)
New & used cams were straightened to 1 thou on the centre bearing's &
centres scraped to one thou on outer bearings
then ground so base of lobe was concentric
both new & used were within 1 thou
measured between centres by hand
if they moved too much during straightening , we put a hammer thru them as they would bend while profiling
new & old were just the same when it come to weakness
Nov 16 2012 07:40 PM -
sledgehammer
Re-profiled lobes have less surface area - so in theory all being equal , will wear quicker
Nov 16 2012 07:51 PM
-
Steely
It's the front drivers side and it's been about 10 months since I last replaced that side. What do you mean by hard or not?
Nov 16 2012 10:09 AM -
Chance
I mean is it hard to do :)
Nov 16 2012 03:35 PM -
waddle
not if you know how and have a vice,
if you dont have a press it can be a bit harder, but save the old baring to drift it in with
Nov 16 2012 06:15 PM
-
gimenofl
The KAD I mean.
Nov 15 2012 02:17 PM
minimaxie
Got my used door cards through the post and my new battery just now, looking forward to driving my Mini again!
Nov 15 2012 12:53 PM
-
Noah
Well she has doors but no door cards, newton commercial sell rover NOS Door Cards for my seat pattern but they're £70 LOL
Nov 15 2012 03:44 PM -
minimaxie
Dude, do what I'm doing and make some of your own!
Nov 15 2012 03:52 PM -
brum,brum,mike
Yeah, make your own... its not that hard! I just bought some hardboard of ebay (about £4, £8 postage... probably cheaper to go to b&q)Then some double sided foam for abit of padding, draw around an old door card as a template, cut everything out. The drill holes where you want stitching! Jobs a good'un ;)
Nov 15 2012 04:59 PM
Joseph-C
I think from now on Ill be saving pics and uploading them to photo bucket instead of copying the url.
Nov 14 2012 07:49 PM
-
matty yellow
hey im having a problem with my dip beam head lights my side lights and mains work but no dip any ideas thanks matt
Nov 15 2012 07:21 PM
