3 replies to this topic

[ProjectMusho]

Hi

I am having some bad problems with my car electrics at the moment and the side lights stay on whenever the cars in ignition and the radiator turns on when I turn the dip switch on full but have no full lights. I have taken all the wires out and want to put them in the correct order on the fuse box again. Can any 1 tell me what colour wires go where and the reason for my problems.

Thanks

Rick

[Bungle]

do you have a haynes manual ?

[taffy1967]

4 Fuse box wiring colours: -

White - Green
Brown - Purple
Light Green/White - Light Green/Orange
Red - Red/Green


Standard 4 fuse box mounted on the bulkhead: -


1 1-2 35amp Brake Lights, Reverse Lights, Direction Indicators & Rear Screen Demister.

2 3-4 25amp Horn, Headlamp Flasher, Brake Failure Circuit & Radio Memory.

3 5-6 25amp Heater Blower Motor, Windscreen Wipers, Washer Motor & Instruments.

4 7-8 15amp Side & Tail Lights & Panel Lights.


1-2 These circuits only operate with the ignition switch at position "II".

5-6 These circuits only operate with the ignition switch at position "I" or "II".


In-Line Fuses situated behind air-filter on the bulkhead: -


15amp - Purple/Orange Wire
Hazard Warning & Interior Lamps


15amp - Brown/Orange Wire
Dim-Dip Lighting


10amp - Blue/Orange Wire
Rear Fog Guard Lamps

[ProjectMusho]

Thanks taffy will try that wen I get time. I do have a haynes manual or did but with my luck can not find it when I need it.