Jump to content


Photo
- - - - -

Ciggy Lighter


  • Please log in to reply
6 replies to this topic

#1 tbonejones

tbonejones

    Learner Driver

  • Noobies
  • PipPip
  • 18 posts

Posted 12 December 2008 - 06:35 PM

So, i push in the lighter and it heats it up fine, bright orange ring in seconds. But I put in a satnav or phone charger and nothing happens, I just dont get it, does anyone have any clue of what might be causing this?

Cheers :kiss:

#2 Danny_California

Danny_California

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,263 posts
  • Location: Warwick

Posted 12 December 2008 - 06:38 PM

Sounds fubarred, grab another from the scrappy and wire that in instead. :kiss:

#3 tbonejones

tbonejones

    Learner Driver

  • Noobies
  • PipPip
  • 18 posts

Posted 12 December 2008 - 06:44 PM

yeah i thought that might be the thing to do, don't think it's a wiring problem then?

thanks

#4 Bungle

Bungle

    Original Spamster

  • Members
  • PipPipPipPipPipPipPipPipPipPipPip
  • 28,971 posts
  • Location: Cornwall
  • Local Club: cornish mini club

Posted 12 December 2008 - 06:45 PM

it's a bit old and stretched and not making a connection

#5 Scotauto

Scotauto

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 335 posts
  • Location: Denmark

Posted 12 December 2008 - 06:53 PM

It's the same if I put my navigation in the socket really bad connection. If I put my phone charger in it just pops out again after 5 secs :kiss: The sockets on the various "appliances" seem to be really different in shape and quality and just don't fit :)

#6 robh

robh

    Mini Mad

  • Noobies
  • PipPipPipPip
  • 120 posts
  • Local Club: KLMC ECMC JEC North Norfolk

Posted 12 December 2008 - 07:50 PM

So, i push in the lighter and it heats it up fine, bright orange ring in seconds. But I put in a satnav or phone charger and nothing happens, I just dont get it, does anyone have any clue of what might be causing this?

Cheers :kiss:


Hi

Get hold of a digital voltmeter and check the polarity of the wiring, the negative should be the outside of the socket and positive should be the centre.
The cigarette lighter is not polarity conscious and will work either way, most modern charger etc have anti reversal wiring ie an in line diode.

Happy Christmas

Edited by robh, 12 December 2008 - 07:50 PM.


#7 lrostoke

lrostoke

    Crazy About Mini's

  • Members
  • PipPipPipPipPipPipPipPipPipPip
  • 6,923 posts
  • Location: Maybank, Staffordshire
  • Local Club: none

Posted 12 December 2008 - 07:50 PM

Just a wild guess, probably a dodgy socket , but are the positive, negative wires connected right way round, wouldn't matter for a lighter, but could do for a charger.




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users