Jump to content


Photo

Fitting A Cigarette Lighter


  • Please log in to reply
13 replies to this topic

#1 alicetheauto

alicetheauto

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,222 posts
  • Location: Leicester
  • Local Club: Rusty Nuts Minis, Leicester

Posted 27 December 2008 - 11:11 AM

got a cigarette lighter socket today to wire in a GPS, but it doesnt say which should be the positive spade? Is it the centre pin, or is it the outer shroud? Anyone know? Cheers!

#2 screech

screech

    Up Into Fourth

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 3,136 posts
  • Location: West Sussex
  • Local Club: Bognor rock ya mini & WSMOC

Posted 27 December 2008 - 11:49 AM

straight down in the centre in positive.

#3 alicetheauto

alicetheauto

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,222 posts
  • Location: Leicester
  • Local Club: Rusty Nuts Minis, Leicester

Posted 27 December 2008 - 12:20 PM

ok, cheers! :)
And fitted it too, behind the dashboard so no little scrote see it and breaks in to chav the satnav....

Edited by alicetheauto, 27 December 2008 - 04:15 PM.


#4 rayjake

rayjake

    Learner Driver

  • Noobies
  • PipPip
  • 18 posts

Posted 09 January 2009 - 11:54 PM

were did you get the cigarette lighter socket from??? ive searched on google but all i can find r the ones with three sockets on, i just want a plain one. also does it have a light around it to spot it??

#5 chappy

chappy

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 1,253 posts

Posted 10 January 2009 - 12:56 AM

were did you get the cigarette lighter socket from??? ive searched on google but all i can find r the ones with three sockets on, i just want a plain one. also does it have a light around it to spot it??



you can get them from your local motor factor (halfrauds,A1 motor parts)


oh... and the ones i've seen while passing in halfrauds do have the small glow ring.

Edited by chappy, 10 January 2009 - 12:57 AM.


#6 jpd

jpd

    Stage One Kit Fitted

  • Noobies
  • PipPipPip
  • 56 posts
  • Local Club: minis'n'oatcakes

Posted 10 January 2009 - 05:20 PM

maplins sell them too

#7 slegersmini

slegersmini

    Speeding Along Now

  • Banned from Buying/Selling
  • PipPipPipPipPip
  • 348 posts
  • Local Club: SMAG

Posted 17 February 2009 - 09:43 AM

i got mine off ebay, i have taken the glow ring off mine, and fabricated a bracket to fit it under the dash out of the way, so its accessible but still tidy and hidden :)

#8 johnbest981

johnbest981

    Mini Mad

  • Members
  • PipPipPipPip
  • 269 posts
  • Local Club: Basingstoke Mini Club

Posted 18 March 2009 - 08:16 PM

Well, Sorry to steal this thread a bit, but it seems a little pointless making a new one.
I recently got a ciggy lighter, and it came with a wire attached a outside bit, that was red.

then it had a bit for a female crimp which i guessed was for earth. so i wired it up as so, but the outside bit just got really hot ove time, but the inside bit didn't get hot at all really, have i wired this the wrong way around or something?

#9 mini_mad69

mini_mad69

    Let future you worry about it

  • Traders
  • PipPipPipPipPipPipPipPipPipPip
  • 5,417 posts
  • Local Club: urrrr no

Posted 18 March 2009 - 09:00 PM

The outer shroud is the earth, and the pin in the bottom is the posotive.

#10 stormintrooper

stormintrooper

    Up Into Fourth

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 2,072 posts

Posted 18 March 2009 - 10:06 PM

have you wired it in so it lights up at night?
i have the same one and somewhat see little faith in getting a merely decent illumination from it

would like to know how yours does?

#11 Saxo-Fiesta-Mini

Saxo-Fiesta-Mini

    Up Into Fourth

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 2,889 posts
  • Local Club: LCMOC

Posted 18 March 2009 - 10:29 PM

lol they shud illiuminate fine my sat nav wirirn is hidden in dash as is the bracket lol :D i didnt want any wires hanging down

#12 stormintrooper

stormintrooper

    Up Into Fourth

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 2,072 posts

Posted 18 March 2009 - 10:43 PM

i was thinking of taping tin foil around it to help direct more light to the ring as i don't see the point in glowing a small area behind my dash green :D

#13 niko-time

niko-time

    Stage One Kit Fitted

  • Noobies
  • PipPipPip
  • 58 posts

Posted 13 April 2009 - 05:04 PM

Hi guys, where can I buy a bracket to fit the cigarette lighter in? something similar to the one here: http://www.minifinit...e...207&t=77888

#14 danrock101

danrock101

    Up Into Fourth

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 2,478 posts
  • Location: Nottingham

Posted 13 April 2009 - 11:34 PM

were did you get the cigarette lighter socket from??? ive searched on google but all i can find r the ones with three sockets on, i just want a plain one. also does it have a light around it to spot it??

some cheap ones on ebay




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users