I have a new IACV or Stepper Motor for my 1998 MPi, is changing it as easy as old one out new one in or are there any procedures to follow to reset anything with the ECU?
Mpi Mini Iacv (stepper Motor) Replacement
Started by
nicksuth
, Feb 26 2009 02:54 PM
2 replies to this topic
#1
nicksuth
-
- Noobies
-
- 1,631 posts
Camshaft & Stage Two Head
- Location: Lutterworth
- Local Club: Rugby Classic Mini Owners Club
Posted 26 February 2009 - 02:54 PM
#2
THedooBZ
-
- Members
-
- 887 posts
One Carb Or Two?
Posted 26 February 2009 - 04:00 PM
my first mini was an mpi and i had to replace the idle air control valve (IACV). it was just a straight swap as the ecu will not know you have changed it as long as it is a like for like swap.
#3
nicksuth
-
- Noobies
-
- 1,631 posts
Camshaft & Stage Two Head
- Location: Lutterworth
- Local Club: Rugby Classic Mini Owners Club
Posted 26 February 2009 - 04:10 PM
I thought as much but having just changed the Throttle Body with new TP sensor which recommended 6 presses of the throttle at ignition position 2 and then 15 seconds with ignition off before starting that it may need something similar???
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
