Looks like it's gonna be a tidy build!
here's my little projert
Started by
tdcibilly
, Aug 21 2005 11:41 AM
26 replies to this topic
#16
Posted 22 August 2005 - 06:11 AM
#17
Posted 22 August 2005 - 05:10 PM
it's a Heritage subframe on the rear the front subframe has be made to fit on the mini mounts.
the engine is a 1.4 gsi lump that is being tuned to the nuts.
the engine is a 1.4 gsi lump that is being tuned to the nuts.
#18
Posted 22 August 2005 - 05:42 PM
minicooperman, I don't think p155 off is a genuine plate. A mate of mine used to put it on at shows for a bit of a laugh. Not sure if the dvla would let it slip through the net! It was on a black mini with 13" revs if i remember correctly.
#19
Posted 22 August 2005 - 05:48 PM
my mini is going to be running 15s for the wheels as the brake disc are 265 by 28.
the calipers are a one off made for my car they cost me £900.00 all in also my mini has not been off the road for 2 years.
the calipers are a one off made for my car they cost me £900.00 all in also my mini has not been off the road for 2 years.
#20
Posted 22 August 2005 - 06:19 PM
You mind me asking what warrented one off custom calipers?
#21
Posted 22 August 2005 - 06:49 PM
to look good i started doing the car a few years ago.
and it's gone on from there as i just fitted some hi-los at the weekend.
also fitted avo shocks all round as well.
and it's gone on from there as i just fitted some hi-los at the weekend.
also fitted avo shocks all round as well.
#22
Posted 22 August 2005 - 08:07 PM
not to put a damper on things as the wheels, and calipers and having a new shell just realy should not be wasted on a Kseries engine !!
i work in a garage for a living and to me its the WOORSED engine .. ok there 'ok' if there ok ..
but they ALLL blow head gaskets and then mess evertghing else up thats connected to it !! ...
i still dont know why they even carry onusing them, specially in the freelanders ... BIGGEST mistake ever that no wunder rover went down the pan ..
just stick with real decent A=series mate ...
Mick ..
i work in a garage for a living and to me its the WOORSED engine .. ok there 'ok' if there ok ..
but they ALLL blow head gaskets and then mess evertghing else up thats connected to it !! ...
i still dont know why they even carry onusing them, specially in the freelanders ... BIGGEST mistake ever that no wunder rover went down the pan ..
just stick with real decent A=series mate ...
Mick ..
#23
Posted 22 August 2005 - 08:11 PM
i got the engine at a good price.
it's out of a p reg car that was very low mileagevery well looked after.
as i know who had the car from new as well
it's out of a p reg car that was very low mileagevery well looked after.
as i know who had the car from new as well
#24
Posted 22 August 2005 - 08:42 PM
I must admit I wondered whether the Vtec or Vaux lump would be more suited, but if you got it on the cheap...
#25
Posted 22 August 2005 - 08:46 PM
i was going to do a honda vtec but i got the k series i had to have some spacer made for the rear wheels as the metro is a bit wider than the mini the spacer i had made bolt onto the rear wheel studs i have put them on the car and she's going to be wide when she's done.
i cannot wait.
i cannot wait.
#26
Posted 22 August 2005 - 08:47 PM
my mate has got a MG ZR 1.4 (k series) and it is a great engine, he has had some engine work and a few bolt on mods and it flies, had it RR'd at 134bhp, which is pretty ruddy fast lol.
it sounds really nice too, willing to rev and had a very good power band, smoooth!
it sounds really nice too, willing to rev and had a very good power band, smoooth!
#27
Posted 23 August 2005 - 05:08 PM
i'm going to be playing with the engine very soon just saving up some cash to do it. :worship:
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users