No replies to this topic

[freduk]

This is on the main page but i thought i would put in here aswell i do hope this is ok as this seems to be more local. if this is a problem please feel free to modorate this post

Hi all i have a 1981 mini hl which i have started to strip for a full rebuild.
I have aquired a lot of new parts in the last few months Ebay etc. However my shell is really bad it has holes in the front floor pans apanels inner panels where the vents go into the car a hole in the roof and rust holes in the bulkhead.

Is this worht trying to weld patch etc. or would a reshell be a cheaper more efficient soloution ?

I will attempt to get the front end off this weekend and upload some photo's.
I am in Camborne Cornwall and have a hot kettle and bacon butties galore if any mini fans in the cornwall are in Camborne at anypoint
Also as i have put under wanted i am after (depending on advice from those who have done this) a shell so if anyone has one please shout me *[email protected]*
I know Ash has scraped his and Orchards and Combellic have none.
Thanks for any help you can give me

Edited by freduk, 17 March 2009 - 08:00 PM.