Attached Files
-
P2120130.JPG 396.79K
4 downloads
pics of mini
Started by
flip_paint_mini
, Mar 14 2004 12:43 AM
6 replies to this topic
#1
flip_paint_mini
-
- Members
-
- 1,578 posts
Flipper
- Local Club: south devon mini club
Posted 14 March 2004 - 12:43 AM
cool
#2
flip_paint_mini
-
- Members
-
- 1,578 posts
Flipper
- Local Club: south devon mini club
#3
flip_paint_mini
-
- Members
-
- 1,578 posts
Flipper
- Local Club: south devon mini club
#4
flip_paint_mini
-
- Members
-
- 1,578 posts
Flipper
- Local Club: south devon mini club
Posted 14 March 2004 - 12:46 AM
where im filling
im only filling hear because the old owner started to
im only filling hear because the old owner started to
Attached Files
-
P2120133.JPG 374.3K
3 downloads
#5
flip_paint_mini
-
- Members
-
- 1,578 posts
Flipper
- Local Club: south devon mini club
Posted 14 March 2004 - 12:47 AM
in side is all out e.g. carpet etc
Attached Files
-
P2120136.JPG 357.98K
10 downloads
#6
marksmini
-
- Admin
-
- 49,441 posts
Mark - Founder of TMF since 2003 - Onwards
- Name: Mark
- Location: Nottingham
- Local Club: TMF
Posted 14 March 2004 - 10:36 AM
what have you done so far then??
#7
flip_paint_mini
-
- Members
-
- 1,578 posts
Flipper
- Local Club: south devon mini club
Posted 14 March 2004 - 04:09 PM
what i have don't is welded the front up where the old driver had a accident 
and filled it as well (just need sanding)
where the manufacture weld is the old driver started to fill the so i have filled that weld to make it all smooth (just also needs sanding)
i have taken the carpets out because they was not so good I’ve taken the centre console out, I’ve taken the two vents out in the dash and blanked them off :fear:
also taken the arches off and treating the surface rust.
more coming soon
should be sanding the filler down this Monday and may be taking the seats out to weld up some longer bar to raise the seats up because they are not straight and are to low lol it sounds stupid but they are to low lol
my kit should be going on in two weeks and my front bumper is getting sorted out this week or so.
when it is do ill get a pic and show u all :fear:
and filled it as well (just need sanding)where the manufacture weld is the old driver started to fill the so i have filled that weld to make it all smooth (just also needs sanding)
i have taken the carpets out because they was not so good I’ve taken the centre console out, I’ve taken the two vents out in the dash and blanked them off :fear:
also taken the arches off and treating the surface rust.
more coming soon
should be sanding the filler down this Monday and may be taking the seats out to weld up some longer bar to raise the seats up because they are not straight and are to low lol it sounds stupid but they are to low lol
my kit should be going on in two weeks and my front bumper is getting sorted out this week or so.
when it is do ill get a pic and show u all :fear:
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
