20 replies to this topic

[Shylos]

I could make one of those, how do they fix to the under side?

Do they slip on like a latex friend?

They have a couple of video that show fitting here if it helps

[the.stroker]

May i suggest a few forum members that have posted some irrelevant and harsh personal comments go back and read the forum guidlines,this thread is about a bonnet cover,and nothing else,may i also add that unwanted comments ( SPAM ) also go against TMF guidlines,sort yourselves out and STAY ON TOPIC!!!

[gibba]

Thread now reopend and trimmed.

Guys, please can you keep on topic, and refrain from any personal insults etc. if you are unsure please read the forum guidelines. Another member is asking for help in locating an item, if anyone has anything positive which may be able to help him, then please post. If it is an uneeded comment, please dont post.

MiniBoy-NL I hope that you are able to locate and find what you need

Gibba

[Retro_10s]

Thread cleaned up and re-opened. Stay on topic please.

[Miniboy-NL]

thanks for all

[dave21478]

If you do find one, or get one made, make sure to remove it fairly often and give the paint underneath a thorough clean and wax, clean the underside of the bra, and let it all dry thoroughly before refitting.
Whilst the original intention of these is to prevent stone-chips on fancy paint, if left on for extended periods, they do much more damage to the paint due to dust and grit working its way underneath and abrading the paint. ALso, trapped moisture from condensation will speed up rusting.