Hey guys, having problems with my mini cooper. When starting it, it will idle at like 300rpm then just stall after a few seconds unless i keep the revs up.
cheers,
Ryan
Spi Problems.
Started by
Miniquick
, Jul 24 2009 07:50 PM
1 reply to this topic
#1
Posted 24 July 2009 - 07:50 PM
#2
Posted 25 July 2009 - 03:04 PM
I had this prob and it turned out to be the stepper motor,get an assistant to turn ignition on (engine not running) and watch to see if the little pin pushes the linkage properly.You should be able to clearly see it move.
Could also be coolant sensor sending wrong signal but only real way to check this one is to either check resistance or fit a new one.
Could also be coolant sensor sending wrong signal but only real way to check this one is to either check resistance or fit a new one.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users