Jump to content


Photo

Spi Wont Start After Rebuild.


  • Please log in to reply
2 replies to this topic

#1 Mattl

Mattl

    Super Mini Mad

  • TMF+ Member
  • PipPipPipPipPipPip
  • 588 posts
  • Location: Brum

Posted 07 August 2009 - 08:44 PM

As the title really. She cranks beautifully but wont start. It doesnt even splutter or anything. I checked i had the correct clutch and that is all fitted right by checking through the gap on the cover to see the missing gap at the flywheel at TDC. I can hear the fuel pump priming nicely as well

I have connected it up to my diagnostic and i get the following:

Failed on 3 tests:

1. Coolant circuit (i initially had my injector and coolant temp connectors mixed up which may have fried the sensor)

2. Throttle scan / linkages
(havent a clue what that actually means)

3. HT/Fuel (Not sure what this means either, but im pretty sure im not getting a spark when cranking, held the bare lead against a stud whilst cranking and nothing, but i did get an arc as a stopped cranking)(The diagnostic reports the igntion LT circuit as good)

Edited by Mattl, 08 August 2009 - 12:14 PM.


#2 Mattl

Mattl

    Super Mini Mad

  • TMF+ Member
  • PipPipPipPipPipPip
  • 588 posts
  • Location: Brum

Posted 08 August 2009 - 12:15 PM

Just updated with some more concise info.

#3 Mattl

Mattl

    Super Mini Mad

  • TMF+ Member
  • PipPipPipPipPipPip
  • 588 posts
  • Location: Brum

Posted 08 August 2009 - 03:36 PM

As the title really. She cranks beautifully but wont start. It doesnt even splutter or anything. I checked i had the correct clutch and that is all fitted right by checking through the gap on the cover to see the missing gap at the flywheel at TDC. I can hear the fuel pump priming nicely as well

I have connected it up to my diagnostic and i get the following:

Failed on 3 tests:

1. Coolant circuit (i initially had my injector and coolant temp connectors mixed up which may have fried the sensor)

2. Throttle scan / linkages
(havent a clue what that actually means)

3. HT/Fuel (Not sure what this means either, but im pretty sure im not getting a spark when cranking, held the bare lead against a stud whilst cranking and nothing, but i did get an arc as a stopped cranking)(The diagnostic reports the igntion LT circuit as good)


Ive just been out and learnt some more about the symptoms so im going to close this thread and start a new one.




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users