Jump to content


Photo

Mini Dashboards For Sale!


  • Please log in to reply
137 replies to this topic

#16 nile-jackson

nile-jackson

    Mini Mad

  • Members
  • PipPipPipPip
  • 155 posts

Posted 01 November 2009 - 06:51 PM

how do you get the colour of the dash red? the bits either side of the walnut as pictured above?

#17 chrisgonz1

chrisgonz1

    Mini Mad

  • Members
  • PipPipPipPip
  • 186 posts
  • Local Club: Purely business!

Posted 01 November 2009 - 08:04 PM

What material is the dashboard made of?

Hi TooFPaste39,
The Dashboards are made out of MDF and are finished with various laminate finishes.
If you have any other questions let me know.
kind Regards,
Chrisgonz1

#18 chrisgonz1

chrisgonz1

    Mini Mad

  • Members
  • PipPipPipPip
  • 186 posts
  • Local Club: Purely business!

Posted 01 November 2009 - 08:14 PM

Hi Chris, i currently already have a walnut bur dash in, i dont know if you can help but where the heater vents are there is obviously a circle piece cut out at each end of the car. I am looking for some chrome trim to place into these holes as they dont fit too flush with the heater vents do you sell anything to fix this problem?

Hi nile-jackson,

I dont sell anything that you can use for this sorry, but i think mini-spares or someone will sell something your after.
I can always make you a dashboard that will fit your holes exactly! :ermm:

how do you get the colour of the dash red? the bits either side of the walnut as pictured above?

The Red is a Matt Red Laminate. I have more pictures of these if you want me to PM them to you?

Sorry for the late reply. If you have any more questions feel free to PM me.


Kind Regards,

chrisgonz1

#19 nile-jackson

nile-jackson

    Mini Mad

  • Members
  • PipPipPipPip
  • 155 posts

Posted 01 November 2009 - 10:31 PM

Hey chris thanks for the anwser. I currently have just bought my mini so the pocket is a little empy BUT

I get paid in two weeks. I know you made the dashboards do you make the center consoles? IF you do do you do the same effects etc?

The matt laminate looks very cool. Is it easy to get hold of?

And if you were to make a dash how would you make it accomadate the vents. As it stands at the moment i already have a walnut dash installed but the two air vents dont sit properly. there is a few mill clearance between them and the vents.

#20 chrisgonz1

chrisgonz1

    Mini Mad

  • Members
  • PipPipPipPip
  • 186 posts
  • Local Club: Purely business!

Posted 01 November 2009 - 11:17 PM

Hey chris thanks for the anwser. I currently have just bought my mini so the pocket is a little empy BUT

I get paid in two weeks. I know you made the dashboards do you make the center consoles? IF you do do you do the same effects etc?

The matt laminate looks very cool. Is it easy to get hold of?

And if you were to make a dash how would you make it accomadate the vents. As it stands at the moment i already have a walnut dash installed but the two air vents dont sit properly. there is a few mill clearance between them and the vents.

Hi Nile,
Im currently working on the centre console. They will have the same laminates applied yes.
The problem you are getting with the air vents...... are you fitting them correctly? what i mean is are the air vents sticking through the dashboard and are you fitting the plastic ring on the outside of the dashboard. can you send me a picture? maybe i can help you out.
Yeh I have quite a bit of matt red in stock.
PM me.
Chrisgonz1

#21 nile-jackson

nile-jackson

    Mini Mad

  • Members
  • PipPipPipPip
  • 155 posts

Posted 02 November 2009 - 12:28 PM

Hey Chris, i am not with the car until weekend. Ill get a picture then and ill show you there is no surround around them and the .its upsetting trying to explain it lol pictues will be up on friday :D

I would love to see the centre console when there finished

#22 chrisgonz1

chrisgonz1

    Mini Mad

  • Members
  • PipPipPipPip
  • 186 posts
  • Local Club: Purely business!

Posted 02 November 2009 - 01:08 PM

Hey Chris, i am not with the car until weekend. Ill get a picture then and ill show you there is no surround around them and the .its upsetting trying to explain it lol pictues will be up on friday :D

I would love to see the centre console when there finished

No Problems Nile,
PM me when you take the photos.
Chris

#23 chrisgonz1

chrisgonz1

    Mini Mad

  • Members
  • PipPipPipPip
  • 186 posts
  • Local Club: Purely business!

Posted 02 November 2009 - 01:23 PM

WWW.CLASSICMINIDASHBOARDS.I8.COM

!!!UPDATE!!!

Current Stock:

Gloss Black – 3 Clock – 3 Gauge x 4 £75
Gloss Black – 2 Clock – 3 Gauge x 2 £75
Burr Walnut – 3 Clock – 3 Gauge x 3 £75
Burr Walnut – 2 Clock – 3 Gauge x 2 £75
Brushed Aluminium – 3 Clock – 3 Gauge x 2 £75
Brushed Aluminium – 2 Clock – 3 Gauge x 1 £75
Beech – 3 Clock – 3 Gauge x 2 £75
Beech – 3 Clock (special Detachable from front) – 3 Gauge x 1 £65
Gloss Black /Red Clocks and Drawer – 3 Clock – 3 Gauge x 1 £75
Matt Red / Gloss Black Clocks and Drawer – 3 Clock – 3 Gauge x 1 £75
Matt Red – 3 Clock – 3 Gauge x 1 £75
Plain MDF – 3 Clock (Flat, See Pics) – 3 Gauge x 3 £35
Plain MDF – 3 Clock (Flat, See Pics) – 2 Gauge x 1 £35
Plain MDF – 3 Clock (Flat, See Pics) – 1 Gauge x 1 £35
Plain MDF – 2 Clock (Flat, See Pics) – 3 Gauge x 1 £35
Plain MDF – 2 Clock (Raised, See Pics) – 3 Gauge x 1 £40

Plain MDF Speakerboards x 11 £8
Gloss Black Speakerboards x 1 £12

Free Delivery with every Dashboard ordered with a Speakerboard! Usualy £10!


Attached File  Speakerboards___Plain_MDF___Gloss_Black.jpg   48.16K   9 downloads
Attached File  Plain_MDF___Raised_Non_Raised.jpg   53.84K   16 downloads
Attached File  Dashboards___1.JPG   84.61K   30 downloads

#24 daddycool

daddycool

    Mini Mad

  • Members
  • PipPipPipPip
  • 273 posts
  • Local Club: N/A

Posted 02 November 2009 - 01:36 PM

Hi Chris,

Got a problem with my MPI dash. The brackets are pants and it rattles about loads, do you make replacements for the brackets?

Thanks in advance

Daddycool

#25 chrisgonz1

chrisgonz1

    Mini Mad

  • Members
  • PipPipPipPip
  • 186 posts
  • Local Club: Purely business!

Posted 02 November 2009 - 01:50 PM

Hi Chris,

Got a problem with my MPI dash. The brackets are pants and it rattles about loads, do you make replacements for the brackets?

Thanks in advance

Daddycool

Hey Daddy.... Daddy coooooool! Heh.
Yeh have a look at the picture. is that what your looking for?
Attached File  Fitting_Kit.jpg   76.9K   35 downloads
The Fitting kit is £7.50 + £5 Postage.

#26 daddycool

daddycool

    Mini Mad

  • Members
  • PipPipPipPip
  • 273 posts
  • Local Club: N/A

Posted 02 November 2009 - 01:54 PM

Hi Chris,

Got a problem with my MPI dash. The brackets are pants and it rattles about loads, do you make replacements for the brackets?

Thanks in advance

Daddycool

Hey Daddy.... Daddy coooooool! Heh.
Yeh have a look at the picture. is that what your looking for?
Attached File  Fitting_Kit.jpg   76.9K   35 downloads
The Fitting kit is £7.50 + £5 Postage.


No I believe there are 3 brackets at the bottob of the dash bolted onto the lower dash rail, then one plastic zigzag type bracket at the top! Its a pretty cr*p design really.

#27 chrisgonz1

chrisgonz1

    Mini Mad

  • Members
  • PipPipPipPip
  • 186 posts
  • Local Club: Purely business!

Posted 02 November 2009 - 02:16 PM

Hi Chris,

Got a problem with my MPI dash. The brackets are pants and it rattles about loads, do you make replacements for the brackets?

Thanks in advance

Daddycool

Hey Daddy.... Daddy coooooool! Heh.
Yeh have a look at the picture. is that what your looking for?
Attached File  Fitting_Kit.jpg   76.9K   35 downloads
The Fitting kit is £7.50 + £5 Postage.


No I believe there are 3 brackets at the bottob of the dash bolted onto the lower dash rail, then one plastic zigzag type bracket at the top! Its a pretty cr*p design really.

Very odd!
Have you got any pictures of it? to be honest i would just take those brackets off and use the type pictured above. alot less hassle. and you can tighten up to your heart content!
chris

#28 daddycool

daddycool

    Mini Mad

  • Members
  • PipPipPipPip
  • 273 posts
  • Local Club: N/A

Posted 02 November 2009 - 02:47 PM

Do you have to tighten them up though the glove compartment and air vents? Its just that my glove box is contained if you understand what I mean?!? I'll try and get some pic of the brackets! Although I think they would be pretty pants!

#29 chrisgonz1

chrisgonz1

    Mini Mad

  • Members
  • PipPipPipPip
  • 186 posts
  • Local Club: Purely business!

Posted 02 November 2009 - 03:04 PM

Do you have to tighten them up though the glove compartment and air vents? Its just that my glove box is contained if you understand what I mean?!? I'll try and get some pic of the brackets! Although I think they would be pretty pants!

Yes it is easier to tighten them up through the glove box and air vents but it can be done by reaching underneath the bottom rail and sticking your hand through. A little bit tricky but once its on, its on!
Yeh PM them to me if you like.
Chris

#30 captainjack15

captainjack15

    Up Into Fourth

  • Banned
  • PipPipPipPipPipPipPipPipPip
  • 3,925 posts
  • Local Club: Somerset Rusteez

Posted 03 November 2009 - 11:22 PM

Hello,

I have had an engine conversion done, and in doing so I have had to use the Honda dials, this has made my interior look shabby as the dials don't fit properly!

Are you able to make custom dashes to suit??

I would be able to get pictures tomorrow to show you! >_<

Jack




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users