will a 1000cc engine driveshaft fit a 1275 engine cheers :wink:
need some help
Started by
jameswildcooper
, Oct 06 2005 03:16 PM
5 replies to this topic
#2
The Matt
-
- Admin
-
- 17,232 posts
You don't escape that easily.....
- Name: Matt
- Location: Overton, North Wales
- Local Club: Welsh Border Minis
Posted 06 October 2005 - 03:19 PM
Depends on the type of output from the differential. If it is the same type then it should fit, some 1275's had hardy spicer type output flanges (bolted on rather than pot joint).
#3
jameswildcooper
-
- Members
-
- 1,991 posts
Camshaft & Stage Two Head
Posted 06 October 2005 - 03:56 PM
cheers dude
#4
bluebottle
-
- Members
-
- 844 posts
One Carb Or Two?
Posted 06 October 2005 - 06:41 PM
if you are swapping the whole driveshaft over, the 998 driveshatf will have smaller outer CV joints, so you'll have to put on your existing outer CV
#5
The Matt
-
- Admin
-
- 17,232 posts
You don't escape that easily.....
- Name: Matt
- Location: Overton, North Wales
- Local Club: Welsh Border Minis
Posted 06 October 2005 - 06:42 PM
Sorry, I assumed he was doing an engine swap and wanted to retain original complete driveshafts.
Never assume, could be wrong! :nugget:
Never assume, could be wrong! :nugget:
#6
Guess-Works.com
-
- Traders
-
- 19,838 posts
Gearbox Guru
- Local Club: Rugby Classic Mini Owners Club
Posted 06 October 2005 - 07:58 PM
Only if you are converting from drums to disks...
CV's are the same between all disk model's with the exception of the 7" cooper mk1 disks.
CV's are the same between all disk model's with the exception of the 7" cooper mk1 disks.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
