22 replies to this topic

[danbmini]

just wondering if anyone had some pictures of their minis with negative camber on the front as i need to balance things up on mine.

cheers

[bmcecosse]

Measure what you have - with a spirit level - on flat ground.

[nicksuth]

About 1.5 Deg

[tadleysimon]

dont take this the wrong way but you look just like louis walsh!

[blacktulip]

with the picture above it looks like 13" wheels really make the negative camber noticable.

[nicksuth]

dont take this the wrong way but you look just like louis walsh!

Sorry but how can I take that the "right" way, the guy's an ass-hole !!!

Wouldn't mind being a £1 behind him (would be nice to sit next to Cheryl or Dannie )

[cooperdan]

dont take this the wrong way but you look just like louis walsh!

[danbmini]

dont take this the wrong way but you look just like louis walsh!

haha classic. has anyone got pics of negative camber on 10" wheels because thats what im using at the mo??

[CobraV8]

Here is another on 13s

[1380rich]

 P1008_24_09_09.jpg   1.68MB   76 downloads

 4643_93873566681_633011681_2359806_6823276_n.jpg   73.49K   66 downloads



rich

[mk1leg]

Mine on 10" ...........................



ajusta rides and spax lowered shoxs..................

[danbmini]

cheers people.

[cobblers]

Not a mini, but my old lupo. You can see the angles
this was a hair under 4 degrees:


Doesn't look so much when you aren't dead straight on:


it handled surprisingly well all considered.

[daddycool]

Not a mini, but my old lupo. You can see the angles
this was a hair under 4 degrees:


Doesn't look so much when you aren't dead straight on:


it handled surprisingly well all considered.

That Lupo is awesome! I want one!

[Kam]

Measure what you have - with a spirit level - on flat ground.

As above mate, if your after pictures of neg camber on 10's then fine but if your trying to align the wheel using pictures (this is what it sounds like to me) then pictures are useless so just do the above advice as a start.

Your not gonna drive this around all year based on pictures are you? Its gonna be measured anyway when its setup properly so just measure it? Otherwise get a rough equal measurement on both sides so you can drive it somewhere for them to sort it out for you.