15 replies to this topic

[george91]

Hello, as the title says what wheel nuts do weller wheers use? I'm looking at getting some weller 10x6" wheels, and i've been searching around, but i can't find an answer i can trust 100% as this is a safety matter. If anyone could tell what type they use and maybe even be able to tell me where i might be able to get some that would be great, thanks in advance.
George

Edited by george91, 13 January 2010 - 01:58 PM.

[Ethel]

I think wheller have a site. The ones I've dealt with used the standard nuts off the pre 84 steel wheels.

[eden7842]

im also interested in this, im using my ones that came with my ultralight at the minit

[luiji89]

im also interested in this, im using my ones that came with my ultralight at the minit

i am also interested!

[WiredbyWilson]

I have a set of wheels nuts I took off my mini when it had weller wheels - standard steel type wheel nuts with long heads.

Bit rusty now but they are sitting doing nothing in a box in my shed...............

[Bungle]

they are the same nuts as any standard steel rim

[luiji89]

do they have a locking one, or not?

[1984mini25]

You can use the standard steel wheel nuts or those chome ones with lockers designed for standard rover minilights.
Or at least those are the ones i'm using with a 45 seat.

[maggies_minder]

had to dig this up. my wellers are about to go on.
i have the correct nuts, but are there any locking nuts made especially for wellers?

the wheel is much thinner than my minilights, so my current locking nuts are no good.

[Bungle]

try a PM to simon@minispares

if a locking nut is available for a steel wheel he should know

[maggies_minder]

will do bungle!

[Bungle]

tell him something rude from me

[maggies_minder]

any suggestions?

[Bungle]

yes but i don't want any more PM's from admin

[maggies_minder]

yes but i don't want any more PM's from admin

ive just noticed youve lost your green title, have you been bad bungle?