6 replies to this topic

[CooperYeo]

Hey, Anyone have anything bad or good to say about these 1.5 :1 Roller Rockers you can get from minisport.
Look like a nice easy mod and im very tempted.

Thanks, Stu!

[blackbelt1990]

I know of someone who had a set that wore away and became very loose not long after purchase, only heard it the once tho!

[Bungle]

i run minisport 1.5 rockers had good results with the standard cam, put about 8 BHP on the engine and didn't lose any low end power

fine as long as you get valve springs to match your cam and the rockers not doing this puts undue wear on valve train

[sirweste]

Utter waste of time and money. Do nothing beneficial for performance. Put undue wear on valve train.
Don't get them! I have my set sat in the garage, standard ratio is whats best

[Burnard]

dont spose u fancy selling them then if you arent going to use them?

[sirweste]

They'll be staying with the car I'm afraid. I have a rare Cooper S model and so want to keep all the standard bits with it, keeping it original - just some of the original bit are sat in my tool chest

[jamesmpi]

there is a really good article in one of the recent Mini Mags by Keith Calver about Roller Rockers. Well worth a read.