6 replies to this topic

[Mark@IR]

Welcome all! Most of you will remember these switches when i was trading in the old sales section under "LCS"

Well, i'm back! Sorted my supplier issues and looking forward to trading with you all once again.

I have 16mm/19mm/22mm/25mm switches with led rings in white, blue, green, orange, yellow, red!

Body colours are 16mm Polished stainless steel, 16mm anodized black, 19/22/25mm in brushed stainless steel and anodized black

They're 12v switches with a 3amp rating. They come with 5 pins on the back, two are used for constant L.E.D if you wish.

They're sealed to a minimum of IP65 and are top quality, easily beating the competition which sells often for £14-15 a pop.

I've sold over 300 with my old LCS name and starting to sell under the IR name for the big relaunch. Every switch i've sold, not one has come back. I'm sure members who have delt with me in the past will come and conferm this.

I'll be posting up another thread for a group buy in a few days, but i am currently holding stock, please post a message for anything you'd like and i'll let you know if i've got it or wether you need to jump into the group buy.

I've got aload of pictures, but i'll just keep it to one illuminated, one black (19mm) and one silver (22mm) for you now.

I'm selling off current stock on Ebay @ £6.99 a pop, anything currently in stock i'll sell to you guys for £5.99 and that includes P&P. New stock will cost more due to the rising costs in importing etc. Please look out for the "group buy" thread aswell for new stock variations!

Any questions fire away, people who've already had these please post in, thank you

[pete1taz]

Hi mate, they are good looking buttons, i was going to put the savage buttons in my car ( ebay no 120488489145 ) but now looking at yours i might change my mind,
do you have any pictures of the buttons in a car.

thanks

[Mark@IR]

Hi mate, they are good looking buttons, i was going to put the savage buttons in my car ( ebay no 120488489145 ) but now looking at yours i might change my mind,
do you have any pictures of the buttons in a car.

thanks

Hi bud, unfortunatly i've not got any pictures of any installed in a Mini, lots of people have bought these but not shared the love! I'll be doing a competition after the group buy for photography work and installations of the switches for people to win some freeeeee goodies. If you go onto my ebay link you'll see in my store some switches, click any link you'll find about 12-15 more pictures in the sale thread as it were.

I'm yet to get onboard with kitcar builders and the such with these, but they're truely lovely'ness and should give Savage something to think about with regards to there prices!

Kindest Regards,

Mark.

[JanZ]

They are looking really good, but is it possible to have them with icons too, which are also give light as same as the ring?

[mini-man-dan]

What modifications would have to be done to the car's wiring to install these? I know savage you have to run extras in the circuit. Very interested in using these for hazards and headlights (I realise 2 switches will be needed for lights)

[captainjack15]

Is there no way you can get hold of an Off/On/On switch in this style??

Also same question as above regarding wiring. Thanks

[Mark@IR]

They are looking really good, but is it possible to have them with icons too, which are also give light as same as the ring?

The options regarding this is still in discussion with my suppliers, the issue i'm having is they want me to pre-order 100 of each for me to do the designs i want. Bearing in mind there is 4 different sizes, 2 different body colours, 6 led colours thats alot of switches just for each icon on the switch. I'll post up more details in the group buy thread when i launch that.

What modifications would have to be done to the car's wiring to install these? I know savage you have to run extras in the circuit. Very interested in using these for hazards and headlights (I realise 2 switches will be needed for lights)

The back of the switch is just like a 'normal' switch if you like, so regarding the 'wiring' of it yes you'll need to make adjustments and use a relay etc to handle the current just like you would any other switch, just these are a little bit more swish! The LED is 12V so you can just run a switched 12V line to that so it comes on with the ignition if you so wish.

Is there no way you can get hold of an Off/On/On switch in this style??

Also same question as above regarding wiring. Thanks

I'm afraid not on the off/on/on, i can get the switches to run 2 circuits but not one circuit twice i'm afraid. To turn on and off lights you'll have to run 2 switches and a bit of clever wiring to get it to work. You'll have your first switch to turn on the dips then the second switch to kick the beams in if thats what i'm thinking your wanting to use it for.

ok thanks , your switches really do look good and as you say half the price . so you will be hopefully selling them next week you say?

the only problem i have is that i have allready bought the switch pannel which holds the savage ones , are your switches the same size as the savage ones?

thanks

ash

The group buy will be posted up next week, thats when you can get your orders in, depending on amount of people interested with determine how long it'll take before i process the order to the suppliers. Current stock is cheaper then the new stock due to rise in production costs, importing costs, import tax etc etc, i will also have a more strict pricing scheme for each switch, so silver and black will be a different price, as will each size, but led colour will be the same price.


Anymore quesitons for information feel free to ask on here, or PM me or Email me on [email protected]

If your part of another club and you think those members would benefit from having these lovely little beauties then i'll sort you and the members concerned with the same sort of deal TMF gets.

Kindest Regards,

Mark.