7 replies to this topic

[MiniBonkerz]

Whats the best way to get a boot back to bear metal grinder and wire brush tool? or sander?

[Ivor Badger]

Whats the best way to get a boot back to bear metal grinder and wire brush tool? or sander?

3M paint stripper wheel.

[MiniBonkerz]

will they fit an angle grinder? do i get one from halfrauds?

[toyboy396]

WIRE BRUSH !!!!!!!!!!!! NOOOOOOOOOOO

Get a good D.A Sander and then some Nitromorse for the bits you cant get in to cleaned off with an old toothbrush.

[998dave]

boot, or boot-lid?

Boot lid I'd go with a soft flapper wheel, don't use a wire brush, you'll probably damage the metal more.

Why do you want to strip it back anyway?

Dave

[MiniBonkerz]

a boot lid the paint work on it is far from ok so i want to bare metal it then etch prime,prime ,paint and laquer it

[Ivor Badger]

Paint stripper wheel fits an electric drill. available at any good automotive paint supplier. Removes paint, polishes metal, does not leave gouges and works on uneven surfaces. so what more do you need?

[MiniBonkerz]

sounds just what im after thanks guys and gals if there were any? lol