6 replies to this topic

[l_e_cook]

hi all

just a quick question

im new to restoring and dont really know much about minis in general but here goes.......

were looking to replace the front floor panels in a leyland mini 95 / pickup and am wandering if the floor panels are the same as in a saloon or if there is a specific panel i have to buy specificly for the pickup

also will i need to brace the shell on the doors or anywhere else

any advice would be great

cheers
lee

Edited by l_e_cook, 13 March 2010 - 07:15 PM.

[hystrix cristata]

I'd have a look on minipickup.org and if you can't find out put a post on there. M-machine seem to be the place most of the pick-up boys get panels from so they should be able to tell you as well if your looking to buy panels

[jwb_moto]

If its the panels in front of the cross member which the seats attach to then yes a saloon floor panel would fit. only difference would be if the gearbox was a rod (long bent lever at approx 45 degrees) or the remote (straight up lever) the latter is the most common.

[l_e_cook]

cheers for the replys the panel im reffering to is the drivers and passengers footwells just infront of the cross member

cheers
lee

will see if a can get a piccy to upload
 DSCF0542.jpg   4.86MB   11 downloads


EDIT: also another question is there anyone that knows about shot/bead/sand blasting in the norfolk area ???
any advice about would be great
thanks again
lee

Edited by l_e_cook, 16 March 2010 - 04:47 PM.

[mini-man-dan]

Yes, the front floor pans are the same as saloons, the rears are longer (or if you buy a complete one then they are longer). Gey yourself over to minipickup.org, it's a very useful site
Dan

[MiniGT5]

I would consider getting a whole floor section with crossmember for that one.

Checkout MiniMachine panel catalog

N.

[l_e_cook]

hi i know it may sound silly but is a complete new floor you think it will need or just the front sections

cheers
lee